- 1. [Spridgets] Pertronix and plug gaps (score: 1)
- Author: Adrian Jones <adrianjones747@earthlink.net>
- Date: Fri, 2 May 2008 07:57:24 -0400 (GMT-04:00)
- I got this reply back from Pertronix: "You may use the Lucas sports coil without using a ballast resistor and you may also increase the plug gap up to 0.010 above original specifications." OK, so wha
- /html/spridgets/2008-05/msg00041.html (7,634 bytes)
- 2. Re: [Spridgets] Pertronix and plug gaps (score: 1)
- Author: "David Lieb" <dbl@chicagolandmgclub.com>
- Date: Fri, 2 May 2008 07:25:02 -0500
- Adrian, The larger the gap, the more voltage it takes to jump it and the hotter the spark. It does very little good to put in a "hot" coil and NOT widen the gap. OTOH, too wide of a gap encourages t
- /html/spridgets/2008-05/msg00042.html (8,096 bytes)
- 3. Re: [Spridgets] Pertronix and plug gaps (score: 1)
- Author: dlancer7676@comcast.net
- Date: Fri, 02 May 2008 12:31:01 +0000
- FWIW I have been running a Crane XR700 electronic ignition without a ballast in my '79 Midget for many years without any attention whatsoever. Totally satisfied with the switch. --David C. If 4 out o
- /html/spridgets/2008-05/msg00043.html (8,641 bytes)
- 4. Re: [Spridgets] Pertronix and plug gaps (score: 1)
- Author: Bill L <pythias@pacifier.com>
- Date: Fri, 2 May 2008 05:47:42 -0700
- I too have a Crane 700... not the new ones that are NOT polarized, but one specifically for Positive Ground... (makes switching over to Negative Earth more expensive!!) i ran the plugs for a a coupl
- /html/spridgets/2008-05/msg00045.html (7,685 bytes)
- 5. Re: [Spridgets] Pertronix and plug gaps (score: 1)
- Author: "Robert E. Shlafer" <pilotrob@webtv.net>
- Date: Sat, 03 May 2008 22:50:12 GMT
- Hi, big Bill.... Yeh....you can further open up the gaps but as you do, they'll require (pull) more from the coil to "bridge" the gap electrically. The coil and wires are no doubt up to it but most o
- /html/spridgets/2008-05/msg00086.html (7,838 bytes)
This search system is powered by
Namazu