- 1. [TR] 59 TR3A caliper shims (score: 1)
- Author: "Andy" <Andy.dixon@comcast.net>
- Date: Tue, 2 Oct 2007 06:54:52 -0400
- Does anyone have any caliper shims lying about that they would like to sell? Alternately, has anyone found anything that will work as a substitute? They are mentioned in the shop manual but don t sho
- /html/triumphs/2007-10/msg00011.html (6,887 bytes)
- 2. Re: [TR] 59 TR3A caliper shims (score: 1)
- Author: "Randall" <tr3driver@ca.rr.com>
- Date: Tue, 2 Oct 2007 08:28:18 -0700
- Haven't done it myself, but it should be easy enough to fabricate them from shim stock (available from any industrial or machine supply place, like McMaster-Carr http://www.mcmaster.com/ or Enco htt
- /html/triumphs/2007-10/msg00014.html (7,344 bytes)
- 3. Re: [TR] 59 TR3A caliper shims (score: 1)
- Author: ray@raysmg.com
- Date: Tue, 02 Oct 2007 14:09:24 -0700
- Andy wrote: "Does anyone have any caliper shims lying about that they would like to sell? Alternately, has anyone found anything that will work as a substitute?" I rebuilt the front suspension on my
- /html/triumphs/2007-10/msg00027.html (7,496 bytes)
- 4. Re: [TR] 59 TR3A caliper shims (score: 1)
- Author: "Ed Woods" <fogbro1@comcast.net>
- Date: Wed, 3 Oct 2007 09:00:41 -0400
- O.K., I give up. Why bother with caliper shims? Ed Woods _______________________________________________ This list supported in part by the Vintage Triumph Register http://www.vtr.org Triumphs mailin
- /html/triumphs/2007-10/msg00040.html (7,214 bytes)
- 5. Re: [TR] 59 TR3A caliper shims (score: 1)
- Author: pethier@comcast.net
- Date: Wed, 03 Oct 2007 13:07:11 +0000
- Because the caliper may not fit on the car without them. I have a very early TR4. With fresh pads, the caliper will not bolt up solid to the bracket. It needs to be shimmed to center the caliper over
- /html/triumphs/2007-10/msg00042.html (8,019 bytes)
- 6. Re: [TR] 59 TR3A caliper shims (score: 1)
- Author: "Alan Salvatore" <6parts@charter.net>
- Date: Wed, 3 Oct 2007 09:14:25 -0400
- If the caliper isn't centered on the rotor, then they are needed. I recently had to order some shims from TRF because I was rebuilding the front suspension on a TR6 and the used caliper I got , neede
- /html/triumphs/2007-10/msg00043.html (8,005 bytes)
This search system is powered by
Namazu