- 1. [TR] TR3 Howling Noise (score: 1)
- Author: William Brewer <wsb1960tr3a@att.net>
- Date: Fri, 20 Aug 2010 16:35:59 -0700 (PDT)
- I used copper washers when I rebuild my can last year and so far so good. Other have used a type of rubber washer that is probably very effective as well. ISTR that the big washer under the center re
- /html/triumphs/2010-08/msg00391.html (7,467 bytes)
- 2. Re: [TR] TR3 Howling Noise (score: 1)
- Author: Kinderlehrer <kinderlehrer@comcast.net>
- Date: Fri, 20 Aug 2010 17:44:46 -0700
- Hello List: Looking at my new re-cored rad and recalling the awkward process in getting at the bolts to remove the rad. Has anyone changed the mounting method for the rad on the side-screen cars? Rem
- /html/triumphs/2010-08/msg00393.html (7,777 bytes)
- 3. Re: [TR] TR3 Howling Noise (score: 1)
- Author: "Randall" <tr3driver@ca.rr.com>
- Date: Fri, 20 Aug 2010 18:08:24 -0700
- Hi Angelo; Here's what the TR Register in Australia has to say about that: "This trick makes it a little easier to remove & fit the bottom radiator bolts. Cut a screwdriver slot in the threaded end o
- /html/triumphs/2010-08/msg00395.html (7,038 bytes)
- 4. Re: [TR] TR3 Howling Noise (score: 1)
- Author: KingsCreekTrees@aol.com
- Date: Fri, 20 Aug 2010 21:21:22 EDT
- I did this on my car quite a few years ago, but here goes.. Don't remove the capture nut, but thread a bolt (same size but longer) up thru the capture nut and then put the radiator on and install the
- /html/triumphs/2010-08/msg00397.html (6,845 bytes)
- 5. Re: [TR] TR3 Howling Noise (score: 1)
- Author: "David Brister" <david.brister@wanadoo.fr>
- Date: Sat, 21 Aug 2010 20:40:18 +0200
- For better or worse, I glued it to the carpet - glue on the non-foil side. _______________________________________________ Triumphs@autox.team.net Donate: http://www.team.net/donate.html Suggested an
- /html/triumphs/2010-08/msg00405.html (7,762 bytes)
- 6. [TR] TR3 Howling Noise (score: 1)
- Author: William Brewer <wsb1960tr3a@att.net>
- Date: Wed, 25 Aug 2010 21:38:48 -0700 (PDT)
- Look at Richard Good's solution. Works great for me. Sent from my iPhone http://autox.team.net/mailman/options/triumphs/rjones@wfeca.net _______________________________________________ Triumphs@autox
- /html/triumphs/2010-08/msg00516.html (8,091 bytes)
This search system is powered by
Namazu