- 1. [TR] Valve timing (score: 1)
- Author: John Gillis <jgillis@tcd.ie>
- Date: Sun, 4 Apr 2010 10:12:47 +0100
- Not likely to be the seal, unless you forgot to install it or some such. If you are sure it's not the hex-head plug in the back corner of the head, I would suspect the plug in the end of the oil gal
- /html/triumphs/2010-04/msg00087.html (6,869 bytes)
- 2. Re: [TR] Valve timing (score: 1)
- Author: Bob <yellowtr@adelphia.net>
- Date: Sun, 4 Apr 2010 09:02:20 -0400
- On to the next set of questions. :^) I have the 5-way connection; the brake light switch and a questionable restrictor valve - a part that is no longer available. What is its purpose and how will I t
- /html/triumphs/2010-04/msg00091.html (7,664 bytes)
- 3. Re: [TR] Valve timing (score: 1)
- Author: "Randall" <tr3driver@ca.rr.com>
- Date: Sun, 4 Apr 2010 08:26:03 -0700
- I put a Falcon exhaust on the TR3A awhile back. Okay, Reagan was in the White House and I had a full head of hair so let's say 'Quite awhile back". It finally failed about 2 weeks ago, the big muffle
- /html/triumphs/2010-04/msg00095.html (7,869 bytes)
- 4. [TR] Valve timing (score: 1)
- Author: John Gillis <JGILLIS@tcd.ie>
- Date: Mon, 4 Jul 2011 09:53:53 +0100
- Sorry to drag this thread out but need to be REALLY sure I am on the right I found the inlet figures for the standard cam which are as follows; starts open at 15 BTDC, closes at 55 ABDC. Using a 180
- /html/triumphs/2011-07/msg00037.html (6,840 bytes)
- 5. [TR] Valve timing (score: 1)
- Author: JGILLIS at tcd.ie (John Gillis)
- Date: Mon, 4 Jul 2011 09:53:53 +0100
- Could I ask somebody with a little spare time to give me an Idiot's step-by-step guide to valve timing using a timing disc,(Kent) and also can it be done with the head off. My search through the web
- /html/triumphs/2011-07/msg00401.html (6,889 bytes)
This search system is powered by
Namazu