- 1. [Tigers] Engine rebuild (score: 1)
- Author: "un-cole-a@juno.com" <un-cole-a@juno.com>
- Date: Thu, 24 Jan 2008 14:46:08 GMT
- I requested a quote for an engine rebuild from a local engine shop and this is the reply I received. This is for a rebuild of the original 260. A stock rebuild on that engine is $2,400.00, plus any u
- /html/tigers/2008-01/msg00244.html (7,698 bytes)
- 2. Re: [Tigers] Engine rebuild (score: 1)
- Author: David Sosna <sosnaenergyconsulting@cox.net>
- Date: Thu, 24 Jan 2008 07:33:32 -0800
- I think I spent a similar amount on my 302 for pretty much the same work as you describe. A big chunk went into pocket porting the stock iron heads. At the time I wanted to keep that engine, since i
- /html/tigers/2008-01/msg00245.html (7,759 bytes)
- 3. Re: [Tigers] Engine rebuild (score: 1)
- Author: "Robert J. Wanty" <rjw@wengco.com>
- Date: Thu, 24 Jan 2008 10:43:42 -0500
- I got my 260 rebuilt for about $1400 (excluding my labor) which included .040 over pistons and cylinder bore, .020 over on the crank; line bore the crank journals, boring the connecting rods for true
- /html/tigers/2008-01/msg00246.html (8,107 bytes)
- 4. Re: [Tigers] Engine rebuild (score: 1)
- Author: "William Lau" <mrlau@charter.net>
- Date: Thu, 24 Jan 2008 10:17:24 -0600
- Correct David, Plus I trust a crate motor way more than a rebuild. The price you are quoting might be right from a nationally renowned engine builder but for a local group I would be wary. Porting th
- /html/tigers/2008-01/msg00247.html (8,719 bytes)
- 5. Re: [Tigers] Engine rebuild (score: 1)
- Author: Stephen Waybright <gswaybright@yahoo.com>
- Date: Thu, 24 Jan 2008 15:56:46 -0800 (PST)
- The crate motor also allows you to get the advantages of a roller cam. _______________________________________________ Support Team.Net http://www.team.net/donate.html Tigers@autox.team.net http://au
- /html/tigers/2008-01/msg00254.html (10,270 bytes)
- 6. Re: [Tigers] Engine rebuild (score: 1)
- Author: Tony Somebody <achd73@yahoo.com>
- Date: Thu, 24 Jan 2008 16:33:58 -0800 (PST)
- List- a couple year back, Im guessing as time flys, one of our members bought a stroker engine from a shop in the south, one of the arolins I think. If memory serves the cost was about 5k but less th
- /html/tigers/2008-01/msg00255.html (9,207 bytes)
- 7. Re: [Tigers] Engine rebuild (score: 1)
- Author: "Jim Parent" <JParent4@tampabay.rr.com>
- Date: Thu, 24 Jan 2008 19:58:42 -0500
- I had a crate motor built up by Keith Kraft about 12 years ago. He does/did build oval track motors. http://www.keithcraft.com/ My engine, with his name on it, is on the top of page 92 of the October
- /html/tigers/2008-01/msg00256.html (8,799 bytes)
- 8. Re: [Tigers] Engine rebuild (score: 1)
- Author: DJoh797014@aol.com
- Date: Thu, 24 Jan 2008 20:11:17 EST
- Hi Tony Summit list a brand new Ford Racing 5.0 with GT 40 Aluminum Heads Cratemotor for $4800. 340hp at 5500 RPM. Dav In a message dated 1/24/2008 6:34:31 P.M. Central Standard Time, achd73@yahoo.co
- /html/tigers/2008-01/msg00257.html (9,859 bytes)
- 9. Re: [Tigers] Engine rebuild (score: 1)
- Author: "Bob Dixon" <bobdixon@frii.com>
- Date: Thu, 24 Jan 2008 19:20:42 -0700
- That might be me. I had a 347 built by T&L engines. It dynoed at 415HP and 450Ftlbs torque on pump gas. It was a pretty sweet setup with Dart Pro1 heads, etc etc. I had do some firewall massaging to
- /html/tigers/2008-01/msg00258.html (8,207 bytes)
- 10. Re: [Tigers] Engine rebuild (score: 1)
- Author: Steve Sage <fastsage@cox.net>
- Date: Thu, 24 Jan 2008 20:49:08 -0700
- I think the engine builder you're looking for may be one of these: http://www.tandlengines.com/ http://www.enginefactory.com/ Of course there's always a Ford factory crate engine for a bit less money
- /html/tigers/2008-01/msg00261.html (7,957 bytes)
- 11. Re: [Tigers] Engine rebuild (score: 1)
- Author: "michael king" <michael.s.king@gmail.com>
- Date: Fri, 25 Jan 2008 14:52:18 +1100
- i THINK THE LOWER END 302'S ARE NOT BEING STOCKED BY FORD ANYMORE (SO I HEAR) APPARENTLY THEY ARE ONLY GOING HIGHER END MOTORS -- Regards Michael King _______________________________________________
- /html/tigers/2008-01/msg00262.html (8,566 bytes)
- 12. [Tigers] Engine rebuild (score: 1)
- Author: "Ronak, TP \(Timothy\)" <Timothy.Ronak@crna.akzonobel.com>
- Date: Thu, 24 Jan 2008 23:53:03 -0500
- You can build your own stroker and the instructions to duplicate mine are on the Tigers united web site (Lunati Stroker article @ www.tigerunited.com <http://www.tigerunited.com/> ). I have around $
- /html/tigers/2008-01/msg00264.html (9,050 bytes)
- 13. [Tigers] Engine Rebuild (score: 1)
- Author: "Schonberger, Barry K" <BKSchonb@usi.edu>
- Date: Fri, 25 Jan 2008 08:46:57 -0600
- Paul's Automotive Engineering in Cincinnati builds Tom and my race engines and stroker engines for a number of Tiger owners in the Midwest. A recent high end 347 was 440 hp and 460 torque. Call Jerry
- /html/tigers/2008-01/msg00267.html (7,927 bytes)
- 14. Re: [Tigers] Engine Rebuild (score: 1)
- Author: "Rense, Mark (GE Indust, ConsInd)" <mark.rense@ge.com>
- Date: Fri, 25 Jan 2008 11:20:55 -0500
- I bought a 5-bolt 289 short block from a fellow Tiger member, then bought the Edelbrock alum Performer Plus heads, Comp Cams 262H cam, KB .030-over 9.5:1 hypereutectic pistons, rods and all the inter
- /html/tigers/2008-01/msg00269.html (8,718 bytes)
- 15. Re: [Tigers] Engine rebuild (score: 1)
- Author: "Patrick Helfer" <patrick@patmania.ch>
- Date: Fri, 14 Mar 2008 11:59:37 +0100
- Hi toni http://www.fordcobraengines.com/347_400Horsepower.htm this is the website you where looking for. What does the list think about this engine? --Urspr|ngliche Nachricht-- Von: tigers-bounces+pa
- /html/tigers/2008-03/msg00152.html (8,552 bytes)
- 16. [Tigers] engine rebuild (score: 1)
- Author: James Armstrong via Tigers <tigers@autox.team.net>
- Date: Wed, 26 Sep 2018 15:13:45 -0400
- --==7584244110104467791== boundary="--=_Part_40582_1012409790.1537989225301" --=_Part_40582_1012409790.1537989225301 Content-Transfer-Encoding: quoted-printable =C2=A0 HelloJim Armstrong here. When i
- /html/tigers/2018-09/msg00033.html (12,774 bytes)
- 17. Re: [Tigers] engine rebuild (score: 1)
- Author: Ron Fraser via Tigers <tigers@autox.team.net>
- Date: Wed, 26 Sep 2018 16:27:02 -0400
- This is a multipart message in MIME format. --==8331956865707465895== boundary="--=_NextPart_000_0033_01D455B5.C43A3EA0" Content-Language: en-us This is a multipart message in MIME format. --=_NextPa
- /html/tigers/2018-09/msg00035.html (18,684 bytes)
This search system is powered by
Namazu