Hello again, OK. I'm working away on different aspects of the rebuild and all. I've glass bead blasted the original exhaust manifolds. Has anybody had good luck with the exhaust manifold coatings the
I did just what you did. I blasted by stock cast iron headers and then applied Eastwood header paint per the instructions. One year later it was rusting through the paint. I complained to Eastwood. T
I used Eastwood's on my manifolds in 1992. Worked GREAT. There is a little rust starting now but boy did they look good for several years. I had them sandblasted at the local headstone maker before p
If you have a store in your area that sells wood stoves they will have heat resistant paint in 5 or 6 colors. **Check out AOL's list of 2007's hottest products. (http://money.aol.com/special/hot-prod
Any time iron of any kind is blasted ground sanded or welded, it is necessary to put an acid etch on the metal to make sure that paint will adhere and that there is no moisture in the metal. Any auto
I have here a can of Rust-Oleum high heat paint purchased at a store that sells wood stoves and cast iron BBQ grills. The instructions say it is good to 1200 degrees. The instructions are the same as