- 1. [oletrucks] 6 lug later model rear end. (score: 1)
- Author: HMills16@aol.com
- Date: Wed, 24 Oct 2001 22:50:21 EDT
- What would be a 6 lug, exposed drive line rear end for a GMC/Chevy 1/2 ton. I am putting together a 47 GMC EC 012 and need a new rear. Suggestions? Hugh Mills KCMO oletrucks is devoted to Chevy and
- /html/oletrucks/2001-10/msg00323.html (6,911 bytes)
- 2. RE: [oletrucks] 6 lug later model rear end. (score: 1)
- Author: "Antonio R. Tijerino" <antonio@innercite.com>
- Date: Wed, 24 Oct 2001 20:24:19 -0700
- I got one out of 69 1/2 ton Chevy truck. Almost same width, 6 lung and same bolt pattern, the ratio is not much better 3.73:1 vs 4.11:1. Thanks, Antonio Guys, What would be a 6 lug, exposed drive lin
- /html/oletrucks/2001-10/msg00324.html (7,627 bytes)
- 3. Re: [oletrucks] 6 lug later model rear end. (score: 1)
- Author: MKlepp4335@cs.com
- Date: Thu, 25 Oct 2001 17:37:50 EDT
- << What would be a 6 lug, exposed drive line rear end for a GMC/Chevy 1/2 ton. >> I used a '62 Chevy truck rear. Same width and bolt pattern as original, but open drive. I had to cut off the original
- /html/oletrucks/2001-10/msg00336.html (7,196 bytes)
- 4. RE: [oletrucks] 6 lug later model rear end. (score: 1)
- Author: "Hanlon, Bill" <Bill.Hanlon@COMPAQ.com>
- Date: Thu, 25 Oct 2001 17:15:10 -0500
- and if you get lucky you might find one with a 3.08 ratio. << What would be a 6 lug, exposed drive line rear end for a GMC/Chevy 1/2 ton. >> I used a '62 Chevy truck rear. Same width and bolt pattern
- /html/oletrucks/2001-10/msg00338.html (7,775 bytes)
This search system is powered by
Namazu