- 1. [oletrucks] Cylinder Head Casting numbers (score: 1)
- Author: "Rich Gallagher" <rgallagrrr@mcn.net>
- Date: Fri, 1 Oct 1999 07:22:27 -0600
- I think I found a '61 261 head for my Chevy short block 261, but the guy says to check the casting number that I need for the 261 head. Are the casting numbers on the cylinder head the same as the ca
- /html/oletrucks/1999-10/msg00006.html (7,771 bytes)
- 2. Re: [oletrucks] Cylinder Head Casting numbers (score: 1)
- Author: safesix@worldnet.att.net
- Date: Fri, 01 Oct 1999 14:54:16 +0000
- I will look at home tonight for the 261 head casting number, I think I have it somewhere. A 261 head may be a difficult item to find. But a 235 head will work if steam holes are drilled to match tho
- /html/oletrucks/1999-10/msg00009.html (8,377 bytes)
- 3. Re: [oletrucks] Cylinder Head Casting numbers (score: 1)
- Author: Grant Galbraith <trks@javanet.com>
- Date: Fri, 01 Oct 1999 16:41:50 -0400
- Most prefer to use a 235 head as the compression is lower on the 261's heads. Casting #'s for a 261 head are different than the block #'s. Here are some 261 head #'s I have: 3836850 3708570 3703570 3
- /html/oletrucks/1999-10/msg00019.html (8,495 bytes)
- 4. Re: [oletrucks] Cylinder Head Casting numbers (score: 1)
- Author: Grant Galbraith <trks@javanet.com>
- Date: Fri, 01 Oct 1999 16:55:50 -0400
- I should of mentioned the 3835913 # is listed as 235 or 261. Grant oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
- /html/oletrucks/1999-10/msg00020.html (8,915 bytes)
- 5. [oletrucks] Cylinder Head Casting numbers (score: 1)
- Author: "Rich Gallagher" <rgallagrrr@mcn.net>
- Date: Sat, 2 Oct 1999 15:54:23 -0600
- Grant, please contact me off list with the details of the 261 head you have at rgallagrrr@mcn.net. Thanks, Rich Gallagher heads. Casting #'s for a 261 head are different than the block #'s. Here are
- /html/oletrucks/1999-10/msg00038.html (7,514 bytes)
This search system is powered by
Namazu