- 1. [oletrucks] Trans/Speedo gears (score: 1)
- Author: Mask1966@aol.com
- Date: Wed, 23 Oct 2002 12:27:41 EDT
- My '65 step has a turbo 350 trans that obviously was in a car with a much higher (numerically low) gear ratio rear end. My truck has 3.73 gears and the speedo reads very high. To maintain an actual 6
- /html/oletrucks/2002-10/msg00277.html (7,220 bytes)
- 2. Re: [oletrucks] Trans/Speedo gears (score: 1)
- Author: "glperry" <glperry@fwi.com>
- Date: Wed, 23 Oct 2002 12:56:19 -0500 (Central Daylight Time)
- Here's what I did with a Camaro that someone put a four-spd rear in when it had automatic. First, understand that there are gears on cable end in tail pc you can pull out, and there is one on shaft y
- /html/oletrucks/2002-10/msg00285.html (8,995 bytes)
- 3. RE: [oletrucks] Trans/Speedo gears (score: 1)
- Author: "Hanlon, Bill (ISS Houston)" <Bill.Hanlon@hp.com>
- Date: Wed, 23 Oct 2002 13:07:01 -0500
- These guys http://www.speedometershop.com/ratio.html#ADAPT aren't real cheap, but they do good work. My '65 step has a turbo 350 trans that obviously was in a car with a much higher (numerically low)
- /html/oletrucks/2002-10/msg00287.html (7,916 bytes)
- 4. RE: [oletrucks] Trans/Speedo gears (score: 1)
- Author: "Jeff Engel" <jengel@ghnaes.com>
- Date: Wed, 23 Oct 2002 14:34:24 -0500
- Try this website: http://www.bgsoflex.com/speedo1.html Jeff Engel 1956 TF Here's what I did with a Camaro that someone put a four-spd rear in when it had automatic. First, understand that there are g
- /html/oletrucks/2002-10/msg00292.html (9,455 bytes)
- 5. RE: [oletrucks] Trans/Speedo gears (score: 1)
- Author: "Jeff Engel" <jengel@ghnaes.com>
- Date: Wed, 23 Oct 2002 14:36:19 -0500
- Here is another site that gives part numbers for the speedo gears in the http://www.chevytalk.com/tech/transmission/calibrate.html Jeff Engel 1956 TF Here's what I did with a Camaro that someone put
- /html/oletrucks/2002-10/msg00293.html (9,552 bytes)
This search system is powered by
Namazu