- 1. .010 Thrust Washers/TR4 (score: 1)
- Author: Alexander Joseph H <AlexanderJosephH@Waterloo.deere.com>
- Date: Wed, 11 Feb 1998 11:18:10 -0600
- With standard thrust washers I get .015 endplay on a freshly ground (Chip, this is the one you sent me a couple years ago) I need a .010 O.S. thrust washer to get it to spec.... .004-.006 endplay. My
- /html/fot/1998-02/msg00037.html (6,825 bytes)
- 2. RE: .010 Thrust Washers/TR4 (score: 1)
- Author: Chip Bond <spirals@esinet.net>
- Date: Wed, 11 Feb 1998 12:26:55 -0500
- Joe, I've got a set (4) of .005's which will work. I'll send them along if you like. (n/c) I didn't know that crank had been cut there. Seeya. With standard thrust washers I get .015 endplay on a fre
- /html/fot/1998-02/msg00038.html (7,144 bytes)
- 3. Re: .010 Thrust Washers/TR4 (score: 1)
- Author: "R. John Lye" <rjl6n@virginia.edu>
- Date: Wed, 11 Feb 1998 13:57:42
- I don't have the catalog in front of me, but as I recall, Moss has .008 thrust washers. Alternatively, you could put an .004 on the front side and a .006 side on the back to get your 0.010 John Lye r
- /html/fot/1998-02/msg00040.html (6,939 bytes)
This search system is powered by
Namazu