- 1. 1500 Crank Shaft Nut Size (score: 1)
- Author: Michael Graziano <mgrazian@ltcm.com>
- Date: Mon, 17 May 1999 14:48:22 -0400
- from exch01.ltcm.com by ltcm.com (8.7.1/1.32(sec)-LK3) id OAA24823; Mon, 17 May 1999 14:48:25 -0400 Reply-to: Michael Graziano <mgrazian@ltcm.com> Sender: owner-spridgets@autox.team.net Anyone know
- /html/spridgets/1999-05/msg01021.html (7,948 bytes)
- 2. Re: 1500 Crank Shaft Nut Size (score: 1)
- Author: Richard Shipman <mbelect@mindspring.com>
- Date: Mon, 17 May 1999 15:04:13 -0400
- Hi Michael, I'm holding in my hand the 1-5/16 inch (3/4" drive) Craftsman socket I used to remove my 1275's front crankshaft bolt. I used a 3/4" to 1/2" adapter and my 1/2" breaker bar to get it loos
- /html/spridgets/1999-05/msg01022.html (8,404 bytes)
- 3. Re: 1500 Crank Shaft Nut Size (score: 1)
- Author: Jeff Boatright <jboatri@emory.edu>
- Date: Mon, 17 May 1999 15:20:40 -0400
- Is this the nut on the front of the crank shaft? If so, on the 1275 I believe it's a 1 and 5/16 (not 15/16). Sears does carry it, though they did not have one in stock when I needed it. I got mine at
- /html/spridgets/1999-05/msg01024.html (8,119 bytes)
- 4. Re: 1500 Crank Shaft Nut Size (score: 1)
- Author: RBHouston@aol.com
- Date: Mon, 17 May 1999 16:52:54 EDT
- << I'm holding in my hand the 1-5/16 inch (3/4" drive) Craftsman socket I used to remove my 1275's front crankshaft bolt. I used a 3/4" to 1/2" adapter and my 1/2" breaker bar to get it loose. Don't
- /html/spridgets/1999-05/msg01028.html (7,644 bytes)
- 5. Re: 1500 Crank Shaft Nut Size (score: 1)
- Author: Travis G Elliott <TGElliott@infoave.net>
- Date: Mon, 17 May 1999 21:47:37 -0400
- I might be a little late on the reply, but mine that I just recently removed was 1 13/16. Travis 79 midget 1500
- /html/spridgets/1999-05/msg01042.html (7,953 bytes)
This search system is powered by
Namazu