Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*1969\s+MGB\s+wheel\s+bearing\s+problem\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*1969\s+MGB\s+wheel\s+bearing\s+problem\s*$/: 7 ]

Total 7 documents matching your query.

1. 1969 MGB wheel bearing problem (score: 1): Author: Larry Hoy <larryhoy@mcione.com>; Date: Thu, 08 Oct 1998 20:50:25 -0600; A couple of days ago while driving my B I felt an odd jerk or sensation which appeared to be a problem with the wheel bearing on the right front swivel axle. I was able to "limp" home, and parked the; /html/mgs/1998-10/msg00390.html (8,494 bytes)
2. Re: 1969 MGB wheel bearing problem (score: 1): Author: Barney Gaylord <barneymg@ntsource.com>; Date: Fri, 09 Oct 1998 04:39:14; retaining washer had spun on the axle, and is stuck .... The "tang" on the inside of the bearing retaining washer is no longer in the machined groove on the axle but about 90 degrees away. .... Oh, h; /html/mgs/1998-10/msg00409.html (8,300 bytes)
3. RE: 1969 MGB wheel bearing problem (score: 1): Author: Larry Hoy <larryhoy@mcione.com>; Date: Fri, 09 Oct 1998 09:01:25 -0600; Probably time for an update. I got the washer out (thanks Nevin, and Barney). I still can't get the hub off. I think the bearing might be welded to the axle. I used a huge puller that I could put beh; /html/mgs/1998-10/msg00435.html (7,517 bytes)
4. RE: 1969 MGB wheel bearing problem (score: 1): Author: Art Pfenninger <ch155@freenet.buffalo.edu>; Date: Fri, 9 Oct 1998 13:47:08 -0400 (EDT); How about drilling through the bearing until it falls apart? Using a new drill it shouldn't take long to see if it works. The other method would be to use a puller such as a factory type that screws; /html/mgs/1998-10/msg00443.html (8,335 bytes)
5. Re: 1969 MGB wheel bearing problem (score: 1): Author: REasterby@aol.com; Date: Fri, 9 Oct 1998 18:00:25 EDT; Maybe try a small cutoff wheel on a Dremel Tool or air vane. If you can't cut through the washer, maybe you can cut the tab off. Good luck.; /html/mgs/1998-10/msg00465.html (6,954 bytes)
6. RE: 1969 MGB wheel bearing problem (score: 1): Author: "Berrie Watson (ADM)" <bwatson@bayflash.stpt.usf.edu>; Date: Mon, 12 Oct 1998 13:08:37 -0400 (EDT); I recently burned one of my bearings so badly that I was able to take the bearings out with a pair of needlenose pliers (they were far from round) and thus remove the hub. Then I used a Dremmel rotar; /html/mgs/1998-10/msg00620.html (9,442 bytes)
7. Re: 1969 MGB wheel bearing problem (score: 1): Author: RJohn50603@aol.com; Date: Wed, 14 Oct 1998 07:11:40 EDT; << I recently burned one of my bearings so badly that I was able to take the bearings out with a pair of needlenose pliers (they were far from round) and thus remove the hub. Then I used a Dremmel ro; /html/mgs/1998-10/msg00668.html (7,949 bytes)

Current List: 1 - 7
Page: [1]