- 1. 6 cylinder pushrod length required (score: 1)
- Author: GuyotLeonF@aol.com
- Date: Sun, 2 Dec 2001 09:08:28 EST
- I require the length of an engine pushrod: It is part # 151073 as found in the Vitesse Mk.2 engine, also the GT6-2, and GT6-3 [up to KE/KF10000]. but NOT part # 129058 from the Vitesse 6, 2-Litre Mk
- /html/fot/2001-12/msg00002.html (7,875 bytes)
- 2. Re: 6 cylinder pushrod length required (score: 1)
- Author: "Rob Dardano" <19to1tr6@mediaone.net>
- Date: Sun, 2 Dec 2001 12:05:40 -0500
- Leon your push rod lenght will be determind buy your rocker geomitry If the head has been modified the stock rods could be a little long The tip of the rocker should ride on the center of the valve s
- /html/fot/2001-12/msg00003.html (8,914 bytes)
- 3. Re: 6 cylinder pushrod length required (score: 1)
- Author: GuyotLeonF@aol.com
- Date: Sun, 2 Dec 2001 17:37:57 EST
- If GT6-2, Rob, Kas, Thanking you both for your responses, Further to the above, the reason that I need to know the length of 151073 is because I presently have fitted to my Vitesse Mk.2/GT6+ engine,
- /html/fot/2001-12/msg00005.html (12,498 bytes)
- 4. Re: 6 cylinder pushrod length required (score: 1)
- Author: "Rob Dardano" <19to1tr6@mediaone.net>
- Date: Sun, 2 Dec 2001 18:45:44 -0500
- kaskas@earthlink.net reduction different If of TR6 is to presently 1.5 (long original for possession I TR6 nor just
- /html/fot/2001-12/msg00006.html (13,729 bytes)
- 5. Re: 6 cylinder pushrod length required (score: 1)
- Author: "Kas Kastner" <kaskas@earthlink.net>
- Date: Sun, 2 Dec 2001 16:16:12 -0800
- The tubeular pushrods are produced with an insert ball and cup that has a portion that goes up into the tube. This is NOT welded in place but simply pressed in. SO.......you can pull out the insert a
- /html/fot/2001-12/msg00007.html (12,981 bytes)
- 6. Re: 6 cylinder pushrod length required (score: 1)
- Author: GuyotLeonF@aol.com
- Date: Sun, 2 Dec 2001 19:25:45 EST
- Thank you Kas, that is just exactly how you described it in your BL Competition Preperation manual for the GT6+ (1977 ed)... Your memory is impressive! Kind Regards LC)on 1921 French Grand Prix drive
- /html/fot/2001-12/msg00008.html (9,039 bytes)
- 7. Re: 6 cylinder pushrod length required (score: 1)
- Author: WEmery7451@aol.com
- Date: Mon, 3 Dec 2001 10:21:52 EST
- << The length is also effected by the base circle diameter of the camshaft. If you have a re-ground cam the rod will come out shorter due to the reduction of the base circle of the cam. Cams, even st
- /html/fot/2001-12/msg00010.html (8,700 bytes)
- 8. Re: 6 cylinder pushrod length required (score: 1)
- Author: WEmery7451@aol.com
- Date: Mon, 3 Dec 2001 12:54:42 EST
- << The tubeular pushrods are produced with an insert ball and cup that has a I went through this process as a government job at the old Shippingport Experimental Nuclear Plant in 1966. I just used th
- /html/fot/2001-12/msg00012.html (9,575 bytes)
- 9. Re: 6 cylinder pushrod length required (score: 1)
- Author: Ted Schumacher <tedtsimx@q1.net>
- Date: Mon, 03 Dec 2001 13:20:19 -0500
- we still have these produced. we can supply any length needed. however, we find that most applications have enough adustment in the rocker arm to make it work. certainly a shim under the pedestal is
- /html/fot/2001-12/msg00013.html (10,783 bytes)
- 10. Re: 6 cylinder pushrod length required (score: 1)
- Author: "Kas Kastner" <kaskas@earthlink.net>
- Date: Mon, 3 Dec 2001 10:31:50 -0800
- Shims under the rocker pedestals is okay until you mill a BUNCH off the head like I did most of the time..then you can expect a change in change the rocker geometry and the shims are working the wron
- /html/fot/2001-12/msg00014.html (10,405 bytes)
- 11. Re: 6 cylinder pushrod length required (score: 1)
- Author: WEmery7451@aol.com
- Date: Mon, 3 Dec 2001 13:57:24 EST
- << Subj: Re: 6 cylinder pushrod length required Date: 12/3/01 10:36:44 AM Pacific Standard Time From: kaskas@earthlink.net (Kas Kastner) To: WEmery7451@aol.com, GuyotLeonF@aol.com CC: fot@autox.team.
- /html/fot/2001-12/msg00015.html (8,759 bytes)
- 12. Re: 6 cylinder pushrod length required (score: 1)
- Author: BFEKENG@aol.com
- Date: Mon, 3 Dec 2001 17:31:25 EST
- Ted, still here & for the last 46 years. Cant say much about Post Office effiency. British Frame & engine 4831 Ryland Ave Temple city Ca 91780 626-443-0939 Ken G.
- /html/fot/2001-12/msg00016.html (7,759 bytes)
- 13. Re: 6 cylinder pushrod length required (score: 1)
- Author: Ted Schumacher <tedtsimx@q1.net>
- Date: Tue, 04 Dec 2001 16:25:40 -0500
- ken, i didn't send this but certainly know where you are. wow, 46 years and all from your garage. truely incredible. i've been doing it for 10 years less and have to have a building and staff. good f
- /html/fot/2001-12/msg00022.html (8,394 bytes)
This search system is powered by
Namazu