Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Aarm\s+fulcrum\s+pins\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Aarm\s+fulcrum\s+pins\s*$/: 7 ]

Total 7 documents matching your query.

1. Aarm fulcrum pins (score: 1): Author: Unknown; Date: Wed, 11 Dec 2002 11:28:54 -0800 (PST); A silly question if I could. I'm going to install new A-arms and new suspension on my bugeye project. I tore every thing apart 6-8 months ago. I usually take pretty good photos of each piece before I; /html/spridgets/2002-12/msg00351.html (7,981 bytes)
2. Re: Aarm fulcrum pins (score: 1): Author: Unknown; Date: Wed, 11 Dec 2002 16:41:15 -0500; Larry The pins go in one way. Opposite each other. The welded ends are on the inside, the nutted ends are outboard. You stick a bushing on the inner end of the A arm, slide the pin in, put the other; /html/spridgets/2002-12/msg00357.html (7,899 bytes)
3. Re: Aarm fulcrum pins (score: 1): Author: Unknown; Date: Thu, 12 Dec 2002 07:41:06 -0700; Maybe mine is wrong but I have both bolts (pins) facing the same direction. Nuts in front on the left side and nuts in back on the right side. With the big washers in contact with the bushings that g; /html/spridgets/2002-12/msg00382.html (7,887 bytes)
4. Re: Aarm fulcrum pins (score: 1): Author: Unknown; Date: Thu, 12 Dec 2002 10:31:00 -0600; Jay and Larry, I will back up Frank's statement. All of mine have the nuts to the outside. If you look at the large washers, you will see that they have a lip on them that precisely fits the large h; /html/spridgets/2002-12/msg00386.html (7,891 bytes)
5. Re: Aarm fulcrum pins (score: 1): Author: Unknown; Date: Thu, 12 Dec 2002 12:56:32 -0500 FILETIME=[BA5B94B0:01C2A207]; FWIW, both my ancient Sprite 1 and combined '58-'69 manual just shows one fulcrum assembly in the exploded view (same factory drawing actually), but it and the written instructions implies all nuts w; /html/spridgets/2002-12/msg00391.html (7,894 bytes)
6. Re: Aarm fulcrum pins (score: 1): Author: Unknown; Date: Thu, 12 Dec 2002 10:05:13 -0800; Frank's description is correct... not sure where your having trouble with inserting the pins, but I'll give you a hand next time I'm in the area if you want. Jay, If your pins are inserted both in t; /html/spridgets/2002-12/msg00392.html (8,478 bytes)
7. RE:Aarm fulcrum pins (score: 1): Author: Unknown; Date: Fri, 13 Dec 2002 07:41:42 -0800 (PST); Frank, Gerard and list, Thanks for the installation information. What you described is what I thought to be the correct installation. Tried pins from two other cars with no success. I won't actually; /html/spridgets/2002-12/msg00459.html (7,331 bytes)

Current List: 1 - 7
Page: [1]