- 1. Another Brake master cylinder question (score: 1)
- Author: Nina Barton <ninab@scoresheet.com>
- Date: Sun, 14 Mar 1999 21:42:59 -0800
- If the pedal squeaks when engaging the brakes, how would you correct this? The master cylinder is new. The car is a 71 BGT.
- /html/mgs/1999-03/msg00812.html (6,699 bytes)
- 2. Re: Another Brake master cylinder question (score: 1)
- Author: "Lawrie Alexander" <Lawrie@britcars.com>
- Date: Mon, 15 Mar 1999 07:09:49 -0800
- 1) Remove the pedal return spring to make sure it is not wear at either end of the spring that is causing the squeak. If it is, replace the spring with a dab of grease where it attaches. 2) Remove th
- /html/mgs/1999-03/msg00823.html (7,394 bytes)
- 3. Re: Another Brake master cylinder question (score: 1)
- Author: Bob Howard <mgbob@juno.com>
- Date: Mon, 15 Mar 1999 13:22:36 EST
- I stopped the squeaks on my GT's pedals with a shot of WD40. Use the little tube that comes on the can so that you can get a blast right up on the pivot point. You might find it easiest to do this f
- /html/mgs/1999-03/msg00835.html (7,467 bytes)
- 4. RE: Another Brake master cylinder question (score: 1)
- Author: JstBob@aol.com
- Date: Tue, 16 Mar 1999 16:09:28 EST
- Nina, You might try a little lubrication on the pedal pivot !! Bob, 71 mgb The master cylinder is new. The car is a 71 BGT.<<
- /html/mgs/1999-03/msg00909.html (6,849 bytes)
This search system is powered by
Namazu