Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Anti\-sway\s+bar\s+mounting\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Anti\-sway\s+bar\s+mounting\s*$/: 6 ]

Total 6 documents matching your query.

1. Anti-sway bar mounting (score: 1): Author: "Healey Bruce" <healeybruce@adelphia.net>; Date: Mon, 18 Dec 2006 21:53:29 -0800; OK, I would like some thoughts and/or other opinions as to a solution to this problem. While replacing the anti-sway bar bushings, I discovered that the rear bolt on the left side frame bushing strap; /html/healeys/2006-12/msg00129.html (6,679 bytes)
2. RE: Anti-sway bar mounting (score: 1): Author: "Michael Salter" <msalter@precisionsportscar.com>; Date: Tue, 19 Dec 2006 07:49:25 -0500; Hi Bruce, The thread for the anti roll bar brackets is in a "weldnut" which is installed on the inside of the frame. If you could get a helicoil in it would probably hold fine as the loads on the bol; /html/healeys/2006-12/msg00131.html (8,436 bytes)
3. RE: Anti-sway bar mounting (score: 1): Author: "Tracy Drummond" <bighealey@charter.net>; Date: Tue, 19 Dec 2006 06:20:53 -0800; I cut both front caps off and replaced them with Moss replacements. Before welding on the new parts may I suggest you put bolts (to keep the weld splashes off the threads)in the plates and add three; /html/healeys/2006-12/msg00134.html (8,226 bytes)
4. RE: Anti-sway bar mounting (score: 1): Author: "Brashear, Jack, N" <JNBrashear@garverengineers.com>; Date: Tue, 19 Dec 2006 09:32:53 -0600; Years ago I saw a fix for this where the guy took a Dremel tool and cut a slot in the vertical frame wall beside the stripped weldnut. A few pops with a chisel and the weldnut was lost forever inside; /html/healeys/2006-12/msg00136.html (9,444 bytes)
5. Re: Anti-sway bar mounting (score: 1): Author: <mgtrcars@galaxyinternet.net>; Date: Tue, 19 Dec 2006 19:34:07 -0500; Man, most of these ideas seem to be pretty drastic measures for us Healeyites that don't weld. Here is a fix that I found at an Ace or True Value store. In those assorted boxes of fittings, washers,; /html/healeys/2006-12/msg00144.html (8,912 bytes)
6. RE: Anti-sway bar mounting (score: 1): Author: "Paul Negus" <Paul.Negus@ipl.com>; Date: Wed, 20 Dec 2006 09:55:21 -0000; Don't you just hate previous owners who "modified" the car in this way - and then you can't get the ** fixing undone next time around!!! Regards Paul Logbridge BN4 From: "Brashear, Jack, N" <JNBrash; /html/healeys/2006-12/msg00157.html (8,531 bytes)

Current List: 1 - 6
Page: [1]