- 1. Axle questions (score: 1)
- Author: DMC12 <DMC12@prodigy.net>
- Date: Wed, 13 Aug 1997 00:33:39 -0400
- I have been told that There rear from a steel wheel car midget and a wire wheel midget are different. Is this true? Other people have told me you can just swap the axles without any other problems. W
- /html/mgs/1997-08/msg00683.html (6,536 bytes)
- 2. Re: Axle questions (score: 1)
- Author: Nory@webtv.net (Nory)
- Date: Wed, 13 Aug 1997 08:42:57 -0400
- I recently finished my own research on this subject (the parts car has wires). I hate to be the bearer of bad news, but you have to switch rear ends. I've been told that's really not as big a deal as
- /html/mgs/1997-08/msg00694.html (6,837 bytes)
- 3. Re: Axle questions (score: 1)
- Author: Wally Teto <monadnoc@wgserv.crystal-mtn.com>
- Date: Wed, 13 Aug 1997 13:13:57 -0700
- I hate to be the bearer of bad news, but you have to switch I have just done this, although on an MGB instead of a Sprite, but yes, changing the entire rear end was not a big deal. My son and I did i
- /html/mgs/1997-08/msg00697.html (6,919 bytes)
- 4. Re: Axle questions (score: 1)
- Author: "J. Adrian Barnes" <adrian@utk.edu>
- Date: Wed, 13 Aug 1997 09:19:31 -0400
- Just be careful when bolting/unbolting the rear-end from the body...some of the bolts thread right into the body, and if the threads on the body get stripped...tough! I found that out trying to put m
- /html/mgs/1997-08/msg00698.html (7,828 bytes)
This search system is powered by
Namazu