- 1. BJ7 SU HS6 float setting (score: 1)
- Author: "Richard Bittmann" <edmyed@harbornet.com>
- Date: Sun, 26 Feb 2006 10:51:01 -0800
- Healey Carburetor Experts, I'm installing new jets and needles in my rebuilt carbs and want to be sure I have the right float setting. HS4's set with a 1/8" to 3/16" bar between the float lid "lip" a
- /html/healeys/2006-02/msg00634.html (6,768 bytes)
- 2. Re: BJ7 SU HS6 float setting (score: 1)
- Author: "Alan Seigrist Blue 100" <healey.nut@gmail.com>
- Date: Mon, 27 Feb 2006 09:03:46 +0800
- I would guess that they are. Actually, float setting is the one setting that isn't that critical, you just want to make sure the lever contacts the float chamber jet at a hair more than 90 deg angle
- /html/healeys/2006-02/msg00641.html (7,305 bytes)
- 3. Re: BJ7 SU HS6 float setting (score: 1)
- Author: TRICARB@aol.com
- Date: Sun, 26 Feb 2006 20:20:57 EST
- Though if it is set too low there will be flooding of the chamber. Bill
- /html/healeys/2006-02/msg00644.html (6,487 bytes)
This search system is powered by
Namazu