- 1. BJ7 manifold nuts (score: 1)
- Author: "Frank Edwards" <logical2@hotmail.com>
- Date: Wed, 27 Dec 2006 16:52:03 +0000
- Hello to all; I am assembling my BJ7 engine after a rebuild. I removed the manifolds 25 years ago (what a mistake). My question is what are the nuts that hold the manifolds on? They are obviously 3/8
- /html/healeys/2006-12/msg00307.html (6,873 bytes)
- 2. RE: BJ7 manifold nuts (score: 1)
- Author: "Michael Salter" <msalter@precisionsportscar.com>
- Date: Wed, 27 Dec 2006 12:08:31 -0500
- Hi Frank, Both types of nuts are correct. The brass ones are used where they will retain an exhaust manifold or both manifolds (ten) and the steel where the nut retains an inlet manifold exclusively
- /html/healeys/2006-12/msg00308.html (7,885 bytes)
- 3. RE: BJ7 manifold nuts (score: 1)
- Author: "Simon Lachlan" <simon.lachlan@homecall.co.uk>
- Date: Wed, 27 Dec 2006 17:51:07 -0000
- Hi Frank, Both types of nuts are correct. The brass ones are used where they will retain an exhaust manifold or both manifolds (ten) and the steel where the nut retains an inlet manifold exclusively
- /html/healeys/2006-12/msg00310.html (8,317 bytes)
This search system is powered by
Namazu