- 1. Brake system problems, Please Help (score: 1)
- Author: "Donald Markham" <donaldmarkham@mindspring.com>
- Date: Fri, 25 Aug 2000 21:45:57 -0500
- I have a problem that I hope you can help me solve or at least point me in the right direction, I have just replaced the master cylinder, both front calipers and both rear wheel cylinders with NEW no
- /html/mgs/2000-08/msg01527.html (7,947 bytes)
- 2. Re: Brake system problems, Please Help (score: 1)
- Author: Bullwinkle <yd3@nvc.net>
- Date: Sat, 26 Aug 2000 10:59:09 -0700
- <<<snip>>> There are at least two different kinds of DOT 4 Brake fluids. Castrol GTLMA meets or exceeds DOT 3/4 specifications. It is composed of Alkyl Polyglycol Ether Esters. I have a bottle of MAG
- /html/mgs/2000-08/msg01542.html (9,300 bytes)
- 3. Re: Brake system problems, Please Help (score: 1)
- Author: "Valerie Stabenow" <hlub34a@aeroinc.net>
- Date: Sat, 26 Aug 2000 13:10:52 -0500
- Try rebleeding the system with the front end of the car up about 10 to 12 inches above the rear end. This has helped me get rid of some air that was hiding. Also...bleed the wheel that's the farthest
- /html/mgs/2000-08/msg01544.html (7,213 bytes)
- 4. Re: Brake system problems, Please Help (score: 1)
- Author: <paul.hunt1@virgin.net>
- Date: Sun, 27 Aug 2000 15:57:16 +0100
- To Valerie's suggestions I would add that I have used a Gunsons EeziBleed to fill/flush a system but have still had to get my beautiful assistant to stand on the pedal while I quickly snap each front
- /html/mgs/2000-08/msg01562.html (7,819 bytes)
- 5. Re: Brake system problems, Please Help (score: 1)
- Author: "Evangelos G. Makris" <xirias@hol.gr>
- Date: Mon, 28 Aug 2000 08:27:00 +0300
- Have you tried reverse bleeding using the largest syringe you can get at drugstore and a small length of clear pipe (syringe to bleed nipple) while your assistant looks into the master cylinder reser
- /html/mgs/2000-08/msg01579.html (8,313 bytes)
This search system is powered by
Namazu