- 1. Busted Bolt Extraction (score: 1)
- Author: Matt Kulka <Matt.Kulka@hboc.com>
- Date: Mon, 09 Mar 1998 17:07:11 -0500
- t rained all day Saturday, and my wife had her mom to visit with, so I had some time to start putting the motor back together on my '74 B. Crankshaft and main bearing caps went in without a hitch, an
- /html/mgs/1998-03/msg00570.html (8,059 bytes)
- 2. Re: Busted Bolt Extraction (score: 1)
- Author: Trevor Boicey <tboicey@brit.ca>
- Date: Mon, 09 Mar 1998 17:18:46 -0500
- A good local machine shop can remove that via EDM, Electron Discharge Machining. A really fancy firey process that works wonders. The trick is getting it to them. -- Trevor Boicey Ottawa, Canada tboi
- /html/mgs/1998-03/msg00571.html (7,153 bytes)
- 3. Re: Busted Bolt Extraction (score: 1)
- Author: Larry Hoy <larryhoy@ecentral.com>
- Date: Mon, 09 Mar 1998 15:34:18 -0700
- Been there done that, about 2 weeks ago infact. I used the trusty Gibbonizer (Dremel tool) to drill out the easy out (who the heck came up with that name?). Took awhile but it worked. Larry Hoy == La
- /html/mgs/1998-03/msg00573.html (8,882 bytes)
- 4. Re: Busted Bolt Extraction (score: 1)
- Author: Ron Madurski <rmadursk@galaxy.galstar.com>
- Date: Mon, 9 Mar 1998 16:47:50 -0600 (CST)
- I think this tap was your downfall. Probably expanded the bolt and made it tighter than it was to start... Do you have a Dremel/Rotary tool you can use to gridn it out? If not you can get a good car
- /html/mgs/1998-03/msg00574.html (7,579 bytes)
- 5. Re: Busted Bolt Extraction (score: 1)
- Author: Richard Peterson <Rich_and_Kerry@compuserve.com>
- Date: Mon, 9 Mar 1998 23:12:14 -0500
- I had something similar happen recently. In my case, there was about 1/8= inch or so of the old bolt sticking out of the hole with the extractor in= it. I used my Dremel tool to cut the bolt flush w
- /html/mgs/1998-03/msg00592.html (7,199 bytes)
This search system is powered by
Namazu