- 1. Center tube bushings (score: 1)
- Author: ejmw7762@netscape.net (EJMW)
- Date: Mon, 06 Nov 2000 21:21:02 -0500
- I got the bushings out no problem. What the problem was and remains is that the rubber bushings will not fit inside the collars on the ends. I even tried to press the inside of the colar out but it s
- /html/alpines/2000-11/msg00100.html (6,675 bytes)
- 2. Re: Center tube bushings (score: 1)
- Author: LOsoccer@aol.com
- Date: Tue, 7 Nov 2000 23:30:07 EST
- I've ready to put my new bushings and need to take out the thin metal sleeve to insert the new bushing. I don't have the solution to "pressing out" the sleeve but thought I could cut it out. It diffe
- /html/alpines/2000-11/msg00113.html (6,900 bytes)
- 3. Re: Center tube bushings (score: 1)
- Author: chuck nicodemus <armorseal@iccom.com>
- Date: Wed, 08 Nov 2000 09:06:21 -0800
- In the past I have used a small metal "burr" a grinding and cutting piece that fits in a 1/4" drill. works very well and if you use a good light to see, you can tell when you are close enough to pry
- /html/alpines/2000-11/msg00118.html (7,159 bytes)
- 4. Re: Center tube bushings (score: 1)
- Author: CANISDOG@aol.com
- Date: Wed, 08 Nov 2000 13:15:55 EST
- I took mine to a machine shop and had them pressed out for $10.00. Paul
- /html/alpines/2000-11/msg00119.html (6,570 bytes)
This search system is powered by
Namazu