- 1. Circuit Load Question (score: 1)
- Author: "Lyn Fatt, Brian A" <brian.lynfatt@eds.com>
- Date: Tue, 17 Oct 2000 14:23:39 -0400
- I've been off and on pursuing the problem of my dryer blowing fuses. Some of you may remember my questions on this list from a few years ago. It's been almost a year before this thing started blowing
- /html/shop-talk/2000-10/msg00083.html (7,600 bytes)
- 2. RE: Circuit Load Question (score: 1)
- Author: Randall Young <ryoung@NAVCOMTECH.COM>
- Date: Tue, 17 Oct 2000 11:52:01 -0700
- IMO, you've got the right answer. There should always be a margin between actual current draw and rated current, to allow for line voltage variations, etc. IMO 10% is a minimum (and ISTR UL requires
- /html/shop-talk/2000-10/msg00084.html (8,300 bytes)
- 3. Re: Circuit Load Question (score: 1)
- Author: Jim Juhas <james.f.juhas@snet.net>
- Date: Tue, 17 Oct 2000 15:15:38 -0400
- While upgrading the supply to provide more current addresses the problem, it seems to me that something else must be wrong if a dryer, rated to run on a 30a line (which is pretty standard?) can so ea
- /html/shop-talk/2000-10/msg00085.html (8,485 bytes)
- 4. RE: Circuit Load Question (score: 1)
- Author: "Lyn Fatt, Brian A" <brian.lynfatt@eds.com>
- Date: Tue, 17 Oct 2000 15:18:40 -0400
- Is there a way for me to find out about the dryer itself? I don't recall anything on any of the little plates saying otherwise. I've traced the wires from the secondary box back to the primary fuse b
- /html/shop-talk/2000-10/msg00086.html (7,480 bytes)
This search system is powered by
Namazu