Subject says it all. The only way I can see to remove the bottom bolt that holds the clutch master cylinder to the pedal box is to unbolt the pedal box and get access from the bottom with an open end
<<Anyone have an easier way? >> Sure, Bill!! <<I think...>> Problem # 1<G>. <<that is what what Haynes >> Problem # 2 !! <<means by remove the two bolts holding the master cylinder to the pedal box>>
Bill With some patients and a 1/4" drive socket set, maybe some needle nose pliers, you can remove the clutch master. I have done it with out removing the pedal box. BUT....if you DO remove the box,
Hello Bill, I unbolted the pedal box and it worked, a bit of contortion was required. I just removed the pedal return springs and lifted the back of the box up and slide my short wrench underneath. I
It can be done with a long extension on the master cylinder side and a box, open end wrench or maybe a socket on the pushrod side. I did it just a few weeks ago. Hold the pushrod side while operatin
<<Should I have Ed "The school marm" Kaler proof all my e-mail in the future? Careful Ed, that nick name could catch on, unless anyone else has a better nickname, suggestions are welcome. <G> I'm sti