- 1. Dipping or blasting (score: 1)
- Author: "Ronak, TP (Timothy)" <Timothy.Ronak@AkzoNobel.com>
- Date: Wed, 24 Apr 2002 19:42:35 -0400
- Be sure that you have whoever does your car use a self etching and non-sanding type of "primer" to facilitate recoating without have to sand every square inch of your car again. If you are intereste
- /html/tigers/2002-04/msg00242.html (7,509 bytes)
- 2. Re: Dipping or blasting (score: 1)
- Author: Larry Paulick <larry.p@erols.com>
- Date: Wed, 24 Apr 2002 20:19:20 -0400
- Tim, this is excellent advise. I had an etch prime, and 2 part epoxy prime, before the body man got the car. Other friend with dipping had no etch prime, and body man had to go through entire car, at
- /html/tigers/2002-04/msg00245.html (8,897 bytes)
- 3. Re: Dipping or blasting (score: 1)
- Author: Paul Burr <tigerpb@ids.net>
- Date: Wed, 24 Apr 2002 20:35:02 -0400
- If you want to see what a "dipped" Tiger looks like: http://users.ids.net/~tigerpb/tiger_pages/Page_3x.html It's al lot cleaner than sand blasting. Paul
- /html/tigers/2002-04/msg00247.html (8,106 bytes)
- 4. Re: Dipping or blasting (score: 1)
- Author: Larry Paulick <larry.p@erols.com>
- Date: Thu, 25 Apr 2002 09:06:19 -0400
- Paul, great pictures, and great job. Congrats. Larry
- /html/tigers/2002-04/msg00253.html (9,623 bytes)
- 5. Re: Dipping or blasting (score: 1)
- Author: SFordRB@aol.com
- Date: Fri, 26 Apr 2002 01:15:37 EDT
- Great advice Tim Sean
- /html/tigers/2002-04/msg00260.html (6,683 bytes)
- 6. RE: Dipping or blasting (score: 1)
- Author: "Ronak, TP (Timothy)" <Timothy.Ronak@AkzoNobel.com>
- Date: Fri, 26 Apr 2002 12:12:18 -0400
- Not sure what ospho is??? You need to have newly blasted steel surface cleaned with degreaser and maybe lightly sanded depending on the grit of sand used. Then use epoxy primer over that. If it has
- /html/tigers/2002-04/msg00262.html (9,690 bytes)
This search system is powered by
Namazu