- 1. Re: Distributor problems (score: 1)
- Author: "William M. Gilroy" <wmgilroy@lucent.com>
- Date: Thu, 08 Oct 1998 13:20:04 -0400
- This is a follow up to my distributor problems that I was having several weeks ago. One of the listers was nice enough to swap my wobbling dizzy with one that worked fine. When he was doing the swap,
- /html/spridgets/1998-10/msg00198.html (8,561 bytes)
- 2. Re: Distributor problems (score: 1)
- Author: Michael Dietsche <mdietsche@yahoo.com>
- Date: Thu, 8 Oct 1998 11:24:21 -0700 (PDT)
- I seem to remember reading in one of the manuals (Chiltons, I think) that the 1500 engine (low compression variety) could take 30 deg total advance (the BTDC position of the distributor + the interna
- /html/spridgets/1998-10/msg00199.html (9,765 bytes)
- 3. Re: Distributor problems (score: 1)
- Author: "Geoff Branch" <branch@valinet.com>
- Date: Thu, 8 Oct 1998 15:45:55 -0400
- I had this same problem when I put in a Mallory dist. on my '74 Midget. I took the clamping ring off the car and found that over the years it had become out of round. I replaced the bolt and nut that
- /html/spridgets/1998-10/msg00203.html (9,264 bytes)
- 4. Distributor problems (score: 1)
- Author: "William M. Gilroy" <wmgilroy@lucent.com>
- Date: Wed, 16 Sep 1998 13:58:11 -0400
- My car is a 1977 Midget with a 1500 cc engine. Last night I went to start a tune-up on the car. I was first going to adjust the air gap on the electronic ignition. I took the distributor cap off and
- /html/spridgets/1998-09/msg00564.html (8,979 bytes)
- 5. Re: Distributor problems (score: 1)
- Author: "William M. Gilroy" <wmgilroy@lucent.com>
- Date: Wed, 23 Sep 1998 18:09:55 -0400
- I finally found out which dizzy I have in my car. I looked at the dizzy and it looked like a 25D but the cap was different. The cap in the Haynes Midget manual has terminals that screw in and mine ha
- /html/spridgets/1998-09/msg00923.html (10,078 bytes)
This search system is powered by
Namazu