- 1. Door Panel Material (score: 1)
- Author: James Barrett <jamesbrt@mindspring.com>
- Date: Thu, 15 Feb 2001 20:31:54 -0500
- I have replaced my interior door panels several times. The pressed fiber boards warp after a year or so here in Florida. I have used various types of pressed boards, some prepainted, some I added pl
- /html/tigers/2001-02/msg00067.html (7,855 bytes)
- 2. Re: Door Panel Material (score: 1)
- Author: CoolVT@aol.com
- Date: Thu, 15 Feb 2001 21:52:25 EST
- An unusual place to find a great variety of backer board is an art supply store. I found an almost exact match for original for seat backs when I recovered mine. I was surprised at the variety they
- /html/tigers/2001-02/msg00070.html (6,801 bytes)
- 3. Re: Door Panel Material (score: 1)
- Author: "Clifford A. Costa" <csquared@idsi.net>
- Date: Thu, 15 Feb 2001 22:22:58 -0500
- I would think that a good grade of marine plywood would hold up well. If you really wanted to be sure you could use a epoxy system (West System) like the boat builder do on the plywood. Cliff Costa
- /html/tigers/2001-02/msg00071.html (8,332 bytes)
- 4. Re: Door Panel Material (score: 1)
- Author: CMeinel464@aol.com
- Date: Thu, 15 Feb 2001 23:02:55 EST
- Instead of wasting your time and money, why don't you purchase our GT panels with the correct heat pleating, metal reinforcements, correct style vinyl which are made on PVC and do not warp! Curt Cla
- /html/tigers/2001-02/msg00072.html (6,713 bytes)
- 5. Re: Door Panel Material (score: 1)
- Author: Larry Paulick <larry.p@erols.com>
- Date: Fri, 16 Feb 2001 09:50:21 -0500
- Hi again Jim. I just did my door panels, and the rest of the car. For the door panels, I had an old plastic mat that goes on the floor for chairs with rollers. Office type supply stuff. It was somewh
- /html/tigers/2001-02/msg00076.html (9,494 bytes)
This search system is powered by
Namazu