Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Door\s+striker\s+adjustment\s+on\s+TR4\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Door\s+striker\s+adjustment\s+on\s+TR4\s*$/: 7 ]

Total 7 documents matching your query.

1. Door striker adjustment on TR4 (score: 1): Author: richhalpern@comcast.net; Date: Wed, 14 Dec 2005 20:07:33 +0000; I am trying to adjust the passenger door striker on my TR4. When the door is closed and the latch is fully engaged in the second position in, the upper part of the door is recessed about 1/8 of an in; /html/triumphs/2005-12/msg00326.html (7,382 bytes)
2. re: Door striker adjustment on TR4 (score: 1): Author: CarlSereda@aol.com; Date: Wed, 14 Dec 2005 18:38:44 EST; Here's a guess; if you have old rubber door seals maybe you need fresh ones so door doesn't ever reach 2nd position, then you can adjust plates to line up flush? Note; the way you say 'upper part' o; /html/triumphs/2005-12/msg00337.html (7,861 bytes)
3. Door striker adjustment on TR4 (score: 1): Author: d spence <dkspence@telus.net>; Date: Wed, 14 Dec 2005 22:11:48 -0700; How does the front edge line up. You may be able to move the hinges a bit to adjust the rear edge == This list supported in part by The Vintage Triumph Register == http://www.vtr.org; /html/triumphs/2005-12/msg00347.html (7,819 bytes)
4. Re: Door striker adjustment on TR4 (score: 1): Author: TR250Driver@aol.com; Date: Thu, 15 Dec 2005 10:00:48 EST; Rich, I have had problems with the fit on both doors on the 62 TR4 due to an amateur frame off restoration. I have had some success by adjusting the front hinges as well as the striker plates. At lea; /html/triumphs/2005-12/msg00354.html (7,844 bytes)
5. Re: Door striker adjustment on TR4 (score: 1): Author: zoboherald@aol.com; Date: Thu, 15 Dec 2005 10:53:17 -0500; ...A lot of people claim that TR4's in general were known for poor body panel fit. Not so with the 63 TR4 which has never been restored and is a "Factory Build". All the panels including the doors, w; /html/triumphs/2005-12/msg00359.html (8,271 bytes)
6. RE: Door striker adjustment on TR4 (score: 1): Author: "Steinman, Bill" <wsteinman@pogolaw.com>; Date: Thu, 15 Dec 2005 10:53:26 -0500; I've got the same problem on the passenger door on my 250. Amateur restoration about 20 years ago. Front fit is perfect, but the rear edge of the door sticks out a good 1/4 of an inch. Any suggestion; /html/triumphs/2005-12/msg00360.html (8,070 bytes)
7. Re: Door striker adjustment on TR4 (score: 1): Author: richhalpern@comcast.net; Date: Thu, 15 Dec 2005 18:50:40 +0000; I have played around with hinge adjustments and such. The screws that hold in the striker look like they should move out in the squarish slots they reside enough to fix the problem, but the backer bl; /html/triumphs/2005-12/msg00375.html (7,374 bytes)

Current List: 1 - 7
Page: [1]