Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Engine\s+Assy\s+and\s+the\s+springs\s+she\s+sits\s+on\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Engine\s+Assy\s+and\s+the\s+springs\s+she\s+sits\s+on\s*$/: 6 ]

Total 6 documents matching your query.

1. Engine Assy and the springs she sits on (score: 1): Author: john fagerlund <johnf@ihot.com>; Date: Thu, 18 Feb 1999 05:00:54 -0800; I'm in the process of assembling my engine, starting with my freshly machined block, and I was wondering what I should do to ensure success. I spent a tidy sum on the machine work, pistons, cam grin; /html/mgs/1999-02/msg00960.html (8,273 bytes)
2. Re: Engine Assy and the springs she sits on (score: 1): Author: David Ambrose <stargazer1@home.com>; Date: Fri, 19 Feb 1999 19:47:51 -0800; The first part of a successful rebuild is cleanliness. Have plenty of rags handy and some hand cleaner. You don't want to get dirt and grit in the fresh bearing surfaces. Check off the steps in the m; /html/mgs/1999-02/msg00970.html (9,572 bytes)
3. Engine Assy and the springs she sits on (score: 1): Author: Florrie & Allen Bachelder <bachldrs@swva.net>; Date: Fri, 19 Feb 1999 23:43:31 -0400; I'm in the process of assembling my engine, starting with my freshly machined block, and I was wondering what I should do to ensure success. I spent a tidy sum on the machine work, pistons, cam grin; /html/mgs/1999-02/msg00972.html (10,479 bytes)
4. Re: Engine Assy and the springs she sits on (score: 1): Author: REwald9535@aol.com; Date: Sat, 20 Feb 1999 10:19:44 EST; In addition to what everyone else has said here let me toss in my $.02 here. When installing bearing caps, turn the engine after tourquing each one. This is not some magical make the car go fast thi; /html/mgs/1999-02/msg00978.html (9,332 bytes)
5. Engine Assy and the springs she sits on (score: 1): Author: Florrie & Allen Bachelder <bachldrs@swva.net>; Date: Sat, 20 Feb 1999 10:54:10 -0400; I'm in the process of assembling my engine, starting with my freshly machined block, and I was wondering what I should do to ensure success. I spent a tidy sum on the machine work, pistons, cam grin; /html/mgs/1999-02/msg00982.html (7,823 bytes)
6. Re: Engine Assy and the springs she sits on (score: 1): Author: Susan and John Roper <vscjohn@huntnet.net>; Date: Sat, 20 Feb 1999 11:09:08 -0600; John, it would take too much space to go through all of reassembly, but here are some thoughts. First set crank in the block with bearings dry. Use plastigauge to check all main bearing clearances at; /html/mgs/1999-02/msg00989.html (12,155 bytes)

Current List: 1 - 6
Page: [1]