- 1. External Oil Feed (score: 1)
- Author: John Mitchell <jmitch@snet.net>
- Date: Sun, 10 Sep 2006 16:37:36 -0400
- Hi everyone, I have a Goodparts GP2 Cam and roller rockers and a few days ago installed the external oil feed line as recommended by Richard Good. It does seem to quiet the valve clatter, but took it
- /html/6pack/2006-09/msg00051.html (6,821 bytes)
- 2. Re: External Oil Feed (score: 1)
- Author: Jay Snable <jsnable@mac.com>
- Date: Sun, 10 Sep 2006 21:03:59 -0700
- Hi John, I have just about the same setup and added Richard's oil separator to take care of a similar (but not so severe) problem. Others have suggested placing a roll-pin in the feed line to reduce
- /html/6pack/2006-09/msg00057.html (7,173 bytes)
- 3. RE: External Oil Feed (score: 1)
- Author: "Navarrette, Vance" <vance.navarrette@intel.com>
- Date: Mon, 11 Sep 2006 07:54:50 -0700
- First let me say that I have no experience with the external oil line, so you may want to delete my blathering immediately, rather than bothering to read any further... OK, I guess you are still rea
- /html/6pack/2006-09/msg00061.html (8,221 bytes)
- 4. Re: External Oil Feed (score: 1)
- Author: John Mitchell <jmitch@snet.net>
- Date: Mon, 11 Sep 2006 11:23:06 -0400
- Richard Good has said there are passages through the roller rocker pedestals that should be pressurized. The extra oil does quiet the valve train clatter, so, I may try a roll pin in the line first.
- /html/6pack/2006-09/msg00062.html (9,029 bytes)
- 5. External oil feed (score: 1)
- Author: michael lunsford <mblunsfordsr@yahoo.com>
- Date: Tue, 12 Sep 2006 04:51:00 -0700 (PDT)
- If you have an aftermarket valve cover it is likely that it does not have an internal baffle as does the stock valve cover. If you have no baffle the vacum from the carbs get an extra opportunity to
- /html/6pack/2006-09/msg00082.html (7,776 bytes)
This search system is powered by
Namazu