- 1. Front suspension thoughts (again!) (score: 1)
- Author: GuyWeller@aol.com
- Date: Sun, 2 Aug 1998 06:01:52 EDT
- Spent some while recently lying under the front of my sprite, just looking and thinking - as one does from time to time. Two ideas : Firstly is there a modification to replace that threaded bolt / gr
- /html/spridgets/1998-08/msg00026.html (8,482 bytes)
- 2. Re: Front suspension thoughts (again!) (score: 1)
- Author: "Steve Byers" <byers@cconnect.net>
- Date: Sun, 2 Aug 1998 12:03:20 -0400
- My tuppence: Re-engineering the suspension for fun, or out of curiosity for whether it can be done, is O.K. But I would imagine that re-engineering it to solve a problem would be much more expensive
- /html/spridgets/1998-08/msg00030.html (9,941 bytes)
- 3. Re: Front suspension thoughts (again!) (score: 1)
- Author: "Mike Gigante" <mikeg@vicnet.net.au>
- Date: Mon, 3 Aug 1998 11:11:59 +1000
- I haven't seen anyone make serious mods to the lower outer pin assembly on a standard wishbone, but I have seen the two rear pickups cut off and replaced with rose joints (heim joints?). This also gi
- /html/spridgets/1998-08/msg00041.html (9,917 bytes)
- 4. Re: Front suspension thoughts (again!) (score: 1)
- Author: "Mike Gigante" <mikeg@vicnet.net.au>
- Date: Mon, 3 Aug 1998 16:54:26 +1000
- I spoke to the club member in question and he is going to provide drawings and a text description. Basically, it uses a modified high tensile bolt and some delrin bushes. You have to remove the exist
- /html/spridgets/1998-08/msg00050.html (9,607 bytes)
- 5. Re: Front suspension thoughts (again!) (score: 1)
- Author: "Steve Byers" <byers@cconnect.net>
- Date: Tue, 4 Aug 1998 15:47:43 -0400
- I think the extra grease fitting is a good idea. I considered it, didn't do it, wish I had. When I lubricate the suspension now, after installing all new parts, the grease comes out between the kingp
- /html/spridgets/1998-08/msg00102.html (8,561 bytes)
- 6. Re: Front suspension thoughts (again!) (score: 1)
- Author: GuyWeller@aol.com
- Date: Tue, 4 Aug 1998 14:24:05 EDT
- I am inclined to agree with you about redesigning the suspension parts, as I said, I was just lying there and contemplating. I last rebuilt the outer pivot points (refurbished wishbone, new pivot pi
- /html/spridgets/1998-08/msg00110.html (7,620 bytes)
This search system is powered by
Namazu