- 1. HELP harness wiring ??? (score: 1)
- Author: Donovan Smith <donscr8@earthlink.net>
- Date: Wed, 09 Feb 2000 22:28:59 -0600
- Help i have a question about my harness , when installing my new dash i noticed that i do not have any of the small sockets and bulbs met for the warning lights. i beleve maybe they were cut out .bec
- /html/tigers/2000-02/msg00083.html (7,769 bytes)
- 2. Re: HELP harness wiring ??? (score: 1)
- Author: Larry Paulick <larry.p@erols.com>
- Date: Thu, 10 Feb 2000 09:12:29 -0500
- Don, you are correct on the three warning lights, as they are part of the original hardness for the Tiger. There is also a separate ground wire that is the ground going to the instruments. Easy to ma
- /html/tigers/2000-02/msg00084.html (8,078 bytes)
- 3. Re: HELP harness wiring ??? (score: 1)
- Author: Bob Palmer <rpalmer@ames.ucsd.edu>
- Date: Thu, 10 Feb 2000 06:47:24 -0800
- I have heard there are new wiring harnesses available, although I don't know offhand where. I'd check the usual suspects like Sunbeam Specialties, etc. You might be a lot better off replacing the ol
- /html/tigers/2000-02/msg00085.html (8,458 bytes)
- 4. Re: HELP harness wiring ??? (score: 1)
- Author: Steve Laifman <Laifman@Flash.Net>
- Date: Thu, 10 Feb 2000 08:50:57 +0000
- The Tiger has a wood dashboard, that does not conduct electricity. The panel lights in each instrument have only a single wire to the bulb, and the shell of the bulb is the ground return of the fila
- /html/tigers/2000-02/msg00086.html (8,770 bytes)
- 5. Re: HELP harness wiring ??? (score: 1)
- Author: Steve Laifman <Laifman@Flash.Net>
- Date: Thu, 10 Feb 2000 10:30:46 +0000
- Sorry, Typo. Should read: -- Steve Laifman < Find out what is most > B9472289 < important in your life > < and don't let it get away!> _/_/_/_/_/_/_/ _/ _/_/_/ _/_/_/ _/ _/ _/ _/ _/ _/ _/ _/_/_/_/ _/
- /html/tigers/2000-02/msg00088.html (8,519 bytes)
- 6. RE: HELP harness wiring ??? (score: 1)
- Author: "Parfitt, Bill @ PDX" <BParfitt@GlacierNW.com>
- Date: Thu, 10 Feb 2000 03:03:25 -0800
- Don, I recently purchased a harness from Sunbeam Specialties who had it shipped from Sunbeam Supreme in England. It was not cheap, in part because I had it sent air express. Sunbeam specialties may h
- /html/tigers/2000-02/msg00089.html (8,733 bytes)
- 7. Re: HELP harness wiring ??? (score: 1)
- Author: "tjordan" <tjordan@wagnerprocess.com>
- Date: Fri, 11 Feb 2000 09:55:29 -0800
- -- Original Message -- From: Steve Laifman <Laifman@Flash.Net> To: Donovan Smith <donscr8@earthlink.net> Cc: <tigers@autox.team.net> Sent: Thursday, February 10, 2000 12:50 AM Subject: Re: HELP harne
- /html/tigers/2000-02/msg00105.html (8,567 bytes)
- 8. Re: HELP harness wiring ??? (score: 1)
- Author: Steve Laifman <Laifman@Flash.Net>
- Date: Fri, 11 Feb 2000 10:40:52 +0000
- Not so strange. The first 400 + Tigers had the Alpine type vinyl dash. Norman (TBON) figures somewhere between 372-388. The last one he saw was B9470372. If yours is higher, I am sure he would want t
- /html/tigers/2000-02/msg00107.html (9,794 bytes)
- 9. Re: HELP harness wiring ??? (score: 1)
- Author: Steve Laifman <Laifman@Flash.Net>
- Date: Fri, 11 Feb 2000 12:19:34 +0000
- So, the "Master" has spoken. Jay says that Rootes, in their mad desire for quality and excellence, have made the Alpine vinyl backing of plastic, and that the ‘daisy -chain' wiring for a ground is us
- /html/tigers/2000-02/msg00108.html (9,302 bytes)
- 10. Re: HELP harness wiring ??? (score: 1)
- Author: "tjordan" <tjordan@wagnerprocess.com>
- Date: Fri, 11 Feb 2000 13:05:21 -0800
- Thanks guys! Now I can give my Electrical Subcontractor the green light. Anyone interested in an original vinyl dash. I have a really cool new dash made of teak from an old Chris Craft boat. Hope it
- /html/tigers/2000-02/msg00109.html (10,179 bytes)
- 11. Re: HELP harness wiring ??? (score: 1)
- Author: MWood24020@aol.com
- Date: Sat, 12 Feb 2000 00:24:35 EST
- << Thanks guys! Now I can give my Electrical Subcontractor the green light. Anyone interested in an original vinyl dash. I have a really cool new dash made of teak from an old Chris Craft boat. Hope
- /html/tigers/2000-02/msg00114.html (8,625 bytes)
- 12. Re: HELP harness wiring ??? (score: 1)
- Author: DJoh797014@aol.com
- Date: Sun, 13 Feb 2000 16:24:06 EST
- Not only that, but the early Tiger's blower switch was a single speed switch, working off the Defroster controls in the center of the dash. Hope your new dash doesn't have a hole drilled for the swit
- /html/tigers/2000-02/msg00157.html (7,938 bytes)
- 13. Re: HELP harness wiring ??? (score: 1)
- Author: TigerCoupe@aol.com
- Date: Mon, 14 Feb 2000 14:18:53 EST
- I have been fascinated by your acquisition of a rare Chris Craft "boat anchor", and was wondering if perhaps you got it with the assistance of Doane Spencer when he was the sole employee at the priv
- /html/tigers/2000-02/msg00180.html (9,738 bytes)
- 14. Re: HELP harness wiring ??? (score: 1)
- Author: "tjordan" <tjordan@wagnerprocess.com>
- Date: Mon, 14 Feb 2000 17:26:22 -0800
- Hard to believe this all started with some teak from an old Chris Craft boat I found abandoned along Suspect Slough on "The Bay". I sometimes ask myself why I am so fortunate to have these things li
- /html/tigers/2000-02/msg00187.html (11,112 bytes)
- 15. Re: HELP harness wiring ??? (score: 1)
- Author: Wally Menke <wallym@ozemail.com.au>
- Date: Wed, 23 Feb 2000 21:12:50 +1100 (EST)
- Dear Bob I had a new wiring harness made up here locally where I got the guy to fit in a proper FUSE BOX that will go in under the dash. As Mr Smith did not think fuses were usefull, and smoking wire
- /html/tigers/2000-02/msg00339.html (8,693 bytes)
- 16. RE: HELP harness wiring ??? (score: 1)
- Author: "Parfitt, Bill @ PDX" <BParfitt@GlacierNW.com>
- Date: Wed, 23 Feb 2000 01:00:38 -0800
- WALLY, BOB & LISTERS, i got a harness through sunbeam specialties. I believe it was more than $150 however. Bill Dear Bob I had a new wiring harness made up here locally where I got the guy to fit in
- /html/tigers/2000-02/msg00343.html (9,099 bytes)
This search system is powered by
Namazu