- 1. Hand brake wire. (score: 1)
- Author: jon.arikstad@merkantildata.no
- Date: Tue, 11 Jan 2000 10:45:22 +0100
- Not much MG driving here in Norway. I was tempted on saturday, +5C here in Oslo, but maybe a little lower/ read ice, at some places. So, instead I put the car on axle stands, removed the wheels, and
- /html/mgs/2000-01/msg00505.html (7,611 bytes)
- 2. Re: Hand brake wire. (score: 1)
- Author: "Paul Hunt" <paul.hunt1@virgin.net>
- Date: Tue, 11 Jan 2000 11:20:25 -0000
- The w/w cable is shorter than the Rostyle cable because the axles are shorter. Therefore I *think* that if you compare the lengths of the short wire going from the lever on the diff to the rh backpla
- /html/mgs/2000-01/msg00507.html (7,426 bytes)
- 3. RE: Hand brake wire. (score: 1)
- Author: jon.arikstad@merkantildata.no
- Date: Tue, 11 Jan 2000 12:47:58 +0100
- To really make a challenge out of it: I have of course thrown away the old cable !! Jon Depressed Norwegian MB driver PS: New cable is not that expensive, but some weeks delivery from abroad ( most
- /html/mgs/2000-01/msg00508.html (7,852 bytes)
- 4. Re: Hand brake wire. (score: 1)
- Author: "Lawrie Alexander" <Lawrie@britcars.com>
- Date: Tue, 11 Jan 2000 08:17:31 -0800
- Actually, although there is a difference in length, either of them can be used if you are willing to make a slight modification. Here's what you do......... Connect the cable to the rear brakes and
- /html/mgs/2000-01/msg00519.html (9,399 bytes)
- 5. Re: Hand brake wire. (score: 1)
- Author: "Paul Hunt" <paul.hunt1@virgin.net>
- Date: Wed, 12 Jan 2000 13:00:07 -0000
- OK, then try this. My old Rostyle cable (the longer of the two) has 28 3/4" in the short cable that goes from the levers on the diff casing to the RH backplate, measured from the tip of the nipple on
- /html/mgs/2000-01/msg00555.html (8,833 bytes)
This search system is powered by
Namazu