Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*How\s+to\s+misalign\s+a\s+distributor\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*How\s+to\s+misalign\s+a\s+distributor\s*$/: 6 ]

Total 6 documents matching your query.

1. How to misalign a distributor (score: 1): Author: BarrMark262@aol.com; Date: Sun, 2 May 2004 14:28:15 EDT; Hi List: I found a quick way to know if you have the distributor 180 degrees wrong; it w'ont seat completely. I thought I had mine right, after removing so I could get the starter out, but I noticed; /html/mgs/2004-05/msg00008.html (7,161 bytes)
2. Re: How to misalign a distributor (score: 1): Author: David Councill <dcouncil@imt.net>; Date: Sun, 02 May 2004 13:02:35 -0600; That is because the trick to getting the distributor off by 180 degrees involves putting in the gear piece in incorrectly first. The distributor itself only goes in one way relative to the gear so if; /html/mgs/2004-05/msg00009.html (7,813 bytes)
3. Re: How to misalign a distributor (score: 1): Author: "Paul Hunt" <paul.hunt1@blueyonder.co.uk>; Date: Mon, 3 May 2004 09:45:20 +0100; The drive gear can go in in any one of six or eight ways. If you disassemble the distributor and incorrectly reassemble it will only go in 180 degrees out. PaulH. degrees; /html/mgs/2004-05/msg00025.html (7,350 bytes)
4. Re: How to misalign a distributor (score: 1): Author: "bernd" <bernd.vabeach@erols.com>; Date: Mon, 3 May 2004 08:30:59 -0400; if we take the presumption that the distributor has not been rebuild or rebuild and not been reassembled incorrectly does the theory still applies that the "dog drive" can be inserted wrong?. I notic; /html/mgs/2004-05/msg00027.html (8,330 bytes)
5. Re: How to misalign a distributor (score: 1): Author: jello@ida.net; Date: Mon, 3 May 2004 11:58:39 US/Mountain; The quickest way to check it is as follows - take off valve cover, turn engine by hand until you see the intake valve of cylinder #1 open. Continue turning the crank by hand slowly until the timing i; /html/mgs/2004-05/msg00034.html (7,894 bytes)
6. Re: How to misalign a distributor (score: 1): Author: "Paul Hunt" <paul.hunt1@blueyonder.co.uk>; Date: Tue, 4 May 2004 10:47:02 +0100; The answer to your question is yes, the drive gear can be inserted incorrectly in any one of six or eight positions, and the distributor will have to be rotated to the correct position before it can; /html/mgs/2004-05/msg00051.html (8,895 bytes)

Current List: 1 - 6
Page: [1]