- 1. Idling problems (score: 1)
- Author: "Bryon K. Fortney" <bfortney@us.oracle.com>
- Date: Thu, 17 Feb 2000 22:07:25 -0600
- Took the advice of several people and replaced the power valve in the carb. Started it up, warmed it up and got it to idle nicely at about 850 RPM. Thought I did it. Took it out for a brief ride arou
- /html/tigers/2000-02/msg00249.html (7,344 bytes)
- 2. Re: Idling problems (score: 1)
- Author: James Barrett <jamesbrt@mindspring.com>
- Date: Fri, 18 Feb 2000 09:18:41 -0500
- Bryon, On my HOLLY carb, I somehow got a single grain of sand inside the front metering plate. This would sometimes block one of the tiny metering holes in the metering block and the Tiger would not
- /html/tigers/2000-02/msg00256.html (8,288 bytes)
- 3. Re: Idling problems (score: 1)
- Author: Steve Laifman <Laifman@Flash.Net>
- Date: Fri, 18 Feb 2000 08:26:21 +0000
- I presume you have checked the float level (hold screw, turn nut) and the float valve sealing. I presume you've checked the opening of the primaries at idle uncovering the transition slots. I presum
- /html/tigers/2000-02/msg00259.html (7,945 bytes)
- 4. Re: Idling problems (score: 1)
- Author: "Bryon K. Fortney" <bfortney@us.oracle.com>
- Date: Fri, 18 Feb 2000 10:31:12 -0600
- Yes to all except the WD 40. Someone suggested this but I did not know what to for, now I do. I will check it a lunch... -- Bryon K. Fortney bfortney@us.oracle.com 281.286.0026(Home Office) 713.374.2
- /html/tigers/2000-02/msg00260.html (8,802 bytes)
- 5. Re: Idling problems (score: 1)
- Author: Craig Wright <craig@p-d-g.com>
- Date: Tue, 22 Feb 2000 14:46:37 -0800
- Check: http://www.holley.com/HiOctn/TechServ/TechInfo/TI-219.html I had similar symptoms on a boat. It idled OK when cold (the choke was on), but not after worming up. I checked that there was prope
- /html/tigers/2000-02/msg00331.html (7,120 bytes)
This search system is powered by
Namazu