Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Lack\s+of\s+Rear\s+Brake\s+Fluid\s+Pressure\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Lack\s+of\s+Rear\s+Brake\s+Fluid\s+Pressure\s*$/: 5 ]

Total 5 documents matching your query.

1. Lack of Rear Brake Fluid Pressure (score: 1): Author: Rizzo Steven D LtCol AETC/XPRU <Steven.Rizzo@randolph.af.mil>; Date: Mon, 8 Nov 2004 10:14:24 -0600; Good day, Listers, My situation is that after replacing the rear wheel cylinders and shoes on my 65 BJ8 I discovered that I have no brake fluid pressure at either wheel. When attempting a brake bleed; /html/healeys/2004-11/msg00181.html (8,065 bytes)
2. Re: Lack of Rear Brake Fluid Pressure (score: 1): Author: "davidwjones" <davidwjones@cox.net>; Date: Mon, 8 Nov 2004 11:44:12 -0500; The flex hose would be my guess. -Unlikely it is blocked elsewhere. If it is, you just have to start opening couplings and working your way back toward the front until you have flow. I'd open the lin; /html/healeys/2004-11/msg00183.html (8,709 bytes)
3. RE: Lack of Rear Brake Fluid Pressure (score: 1): Author: "Michael Salter" <michaelsalter@rogers.com>; Date: Mon, 8 Nov 2004 12:32:51 -0500; Hi Stever, Your guess is almost certainly correct. Swelling and separation of the inner liner of the original brake and clutch flex hoses is very common and will produce the symptoms that you describ; /html/healeys/2004-11/msg00186.html (8,676 bytes)
4. Re: Lack of Rear Brake Fluid Pressure (score: 1): Author: David Nock <healeydoc@sbcglobal.net>; Date: Mon, 08 Nov 2004 09:41:35 -0700; Steve, I doubt that it is the flex hose. If the hose is swelled shut the master cylinder would push the fluid past the restriction and then the rear brakes would stick on because the fluid would be l; /html/healeys/2004-11/msg00187.html (9,225 bytes)
5. Re: Lack of Rear Brake Fluid Pressure (score: 1): Author: Blue One Hundred <international_investor@yahoo.com>; Date: Mon, 8 Nov 2004 17:16:39 -0800 (PST); It's your flex line. This is a very common problem with rubber flex lines. By the way on both my BJ8 and early BN1 I've switched to stainless braided teflon flex lines for the brakes (i.e. racing fl; /html/healeys/2004-11/msg00216.html (8,835 bytes)

Current List: 1 - 5
Page: [1]