Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Lucas\s+25D\s+distributor\s+bushing\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Lucas\s+25D\s+distributor\s+bushing\s*$/: 6 ]

Total 6 documents matching your query.

1. Lucas 25D distributor bushing (score: 1): Author: "Larry Hoy" <larryhoy@prodigy.net>; Date: Sun, 7 Jan 2001 13:42:33 -0700; I have a stack of old 25D distributors. All of which seem to have some slop in the cam, which probably results from a worn bushing. I looked in the Moss catalog and discovered the bushings are availa; /html/mgs/2001-01/msg00192.html (7,136 bytes)
2. Re: Lucas 25D distributor bushing (score: 1): Author: LBCarCoMail@aol.com; Date: Sun, 7 Jan 2001 16:03:37 EST; I know Eric Jones rebuild them on a regular basis and has had good success with them. Best regards, Jeff Zorn Little British Car Co., Ltd. Visit us on the web www.LBCarCo.com << Subj: Lucas 25D dist; /html/mgs/2001-01/msg00193.html (7,694 bytes)
3. Re: Lucas 25D distributor bushing (score: 1): Author: "bill king" <kingwj@del.net>; Date: Sun, 7 Jan 2001 16:10:13 -0500; I rebuilt my grandfather's pre 1920 lathe using bushings from my local bearing supply house. Couldn't beat the price. The Lucas bushings may be standard off the shelf items. Bill slop in the cam, whi; /html/mgs/2001-01/msg00195.html (7,718 bytes)
4. RE: Lucas 25D distributor bushing (score: 1): Author: "Larry Hoy" <larryhoy@prodigy.net>; Date: Sun, 7 Jan 2001 23:08:37 -0700; I didn't press out the bushing in any of the distributor housings but it looks like you could buy the bushing at a bearing store. It's pretty long and narrow but it might be possible to find one. I e; /html/mgs/2001-01/msg00219.html (8,675 bytes)
5. Re: Lucas 25D distributor bushing (score: 1): Author: Mgbbob@aol.com; Date: Tue, 9 Jan 2001 22:34:49 EST; I haven't rebuilt any distributors but, if the bushing is brass or bronze, they should be available from any tool or industrial bearing supplier. If you measure the OD and ID, I'll do some research; /html/mgs/2001-01/msg00282.html (7,031 bytes)
6. RE: Lucas 25D distributor bushing (score: 1): Author: "Larry Hoy" <larryhoy@prodigy.net>; Date: Wed, 10 Jan 2001 09:00:26 -0700; Hi Bob I've talked to several people about this bushing. Apparently Lucas, in there infinite wisdom, made two slightly different bushings. Neither are just "straight through" bushings, or at least on; /html/mgs/2001-01/msg00301.html (8,236 bytes)

Current List: 1 - 6
Page: [1]