- 1. RE: MC pic (score: 1)
- Author: Bill Babcock <BillB@bnj.com>
- Date: Sat, 19 Feb 2005 17:54:07 -0800
- The wilwood master cylinder really really _IS_ actually drilled for AN-3. At the bottom of the hole is a standard 37 degree internal taper. They supply an adapter with the master cylinder that conver
- /html/fot/2005-02/msg00232.html (7,931 bytes)
- 2. RE: MC pic (score: 1)
- Author: Bill Babcock <BillB@bnj.com>
- Date: Sat, 19 Feb 2005 18:23:19 -0800
- They're too long. Chris Kantarjiev suggested that too. I'm being ridiculously fussy, but I'll find the right fitting sooner or later. Bill, how about using a bulkhead fitting? They are long on one si
- /html/fot/2005-02/msg00233.html (8,655 bytes)
- 3. RE: MC pic (score: 1)
- Author: "Joe Boruch" <jaboruch@netzero.net>
- Date: Sun, 20 Feb 2005 02:20:41 GMT
- Bill, how about using a bulkhead fitting? They are long on one side and short on the other. Joe(B) -- Bill Babcock <BillB@bnj.com> wrote: The wilwood master cylinder really really _IS_ actually drill
- /html/fot/2005-02/msg00234.html (8,289 bytes)
- 4. Re: MC pic (score: 1)
- Author: REK46@aol.com
- Date: Sat, 19 Feb 2005 21:54:52 EST
- Sounds like you should send an email to Wilwood tech help and ask them what they recommend and who makes it 'cause I have never seen one .Yes the -3 threads are same as 3/8-24 ,but they are short ,to
- /html/fot/2005-02/msg00235.html (6,731 bytes)
- 5. RE: MC pic (score: 1)
- Author: Bill Babcock <BillB@bnj.com>
- Date: Sun, 20 Feb 2005 10:43:40 -0800
- For what it's worth, here's some pictures. Notice that the 90 degree angle is the long AN3, while the union is the short. Unfortunately I can't use the 90 degree adapter--it won't clear. The AN-3 to
- /html/fot/2005-02/msg00243.html (8,923 bytes)
This search system is powered by
Namazu