- 1. Missing something (score: 1)
- Author: "Carter Tuggle" <goutvols2@mchsi.com>
- Date: Sat, 2 Aug 2003 16:26:33 -0500
- I'll try to be short. I have a 79 midget. I removed the head, replaced the head gasket and had a machine shop mill the head & check for cracks. I now have reinstalled everything but I can not get it
- /html/mgs/2003-08/msg00035.html (7,214 bytes)
- 2. RE: Missing something (score: 1)
- Author: "J. Barry Waterland" <artforu@earthlink.net>
- Date: Sat, 2 Aug 2003 15:04:30 -0700
- Assuming the timing has not been affected I suggest you work backwards by checking first that you actually have a good spark at the plugs. Depending on how much was removed from the head, you may ha
- /html/mgs/2003-08/msg00036.html (7,922 bytes)
- 3. Re: Missing something (score: 1)
- Author: dmeadow@juno.com
- Date: Sat, 2 Aug 2003 17:07:24 -0500
- You need these three basic things to fire up, everything else is an Spark Fuel Compression Check the spark first. Take a plug and attach it to each spark lead, one at a time. Hold the plug against th
- /html/mgs/2003-08/msg00037.html (9,307 bytes)
- 4. Re: Missing something (score: 1)
- Author: "Dean T. Lake" <dtlake@erols.com>
- Date: Sat, 2 Aug 2003 18:09:27 -0400
- Start by diagnosing specifically where the spark is or is not. In other words, confirm the plug wires are offering spark. If not, work backwards to find an ignition fault. When you change the plugs,
- /html/mgs/2003-08/msg00038.html (7,595 bytes)
- 5. RE: Missing something (score: 1)
- Author: "Larry" <list@marketvalue.net>
- Date: Sat, 2 Aug 2003 16:11:36 -0600
- Have you checked for spark at the coil and plugs? Larry Hoy /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive
- /html/mgs/2003-08/msg00039.html (7,753 bytes)
This search system is powered by
Namazu