- 1. Re: PCV - to vent or not to vent! (score: 1)
- Author: Unknown
- Date: Mon, 24 Jan 2000 09:47:58 -0500charset="iso-8859-1"
- hmmm.... I think a bit of clarification is in order here. Yes...as Chris reiterated, the whole point is to keep a slight vacuum on the crankcase (lower end) . This helps to keep the oil inside the cr
- /html/spridgets/2000-01/msg01264.html (10,344 bytes)
- 2. Re: PCV - to vent or not to vent! (score: 1)
- Author: Unknown
- Date: Mon, 24 Jan 2000 10:46:17 -0500
- I was under the impression that Larry was using a Weber set-up, where the vent line goes to a fitting on the air cleaner, rather than the carb itself. Since the air cleaner fitting generates much le
- /html/spridgets/2000-01/msg01266.html (11,893 bytes)
- 3. Re: PCV - to vent or not to vent! (score: 1)
- Author: Unknown
- Date: Mon, 24 Jan 2000 08:33:53 -0800
- Thanks for all the info guy's. I know this has been discussed before but I can never remember. The PCV hookup is going to be a tube from the timing cover connected to a tube from the valve cover rout
- /html/spridgets/2000-01/msg01269.html (13,003 bytes)
- 4. Re: PCV - to vent or not to vent! (score: 1)
- Author: Unknown
- Date: Mon, 24 Jan 2000 11:51:57 -0500charset="iso-8859-1"
- AAhh... much better...definitely non-vented. Paul Tegler wizardz@toad.net http://www.teglerizer.com OBie - '73 BGT - daily driver http://www.teglerizer.com/mgstuff/ob_description.htm Punkin' - '78 Sp
- /html/spridgets/2000-01/msg01270.html (13,590 bytes)
- 5. Re: PCV - to vent or not to vent! (score: 1)
- Author: Unknown
- Date: Mon, 24 Jan 2000 12:31:25 -0500
- Non vented, with him hooking up to manifold vacuum without a restrictor? Are you sure? I'd have thought vented, otherwise you'd be pulling a LOT of vacuum. Chris K.
- /html/spridgets/2000-01/msg01272.html (15,000 bytes)
- 6. Re: PCV - to vent or not to vent! (score: 1)
- Author: Unknown
- Date: Mon, 24 Jan 2000 14:02:42 -0500
- Never mind. I didn't realize that the 1275 PCV restricted the total vacuum. (I should have figured it would, given the way it's plumbed, but my figurer is overloaded of late...) Definitely vented cap
- /html/spridgets/2000-01/msg01273.html (15,947 bytes)
This search system is powered by
Namazu