- 1. Polishing the carbs (score: 1)
- Author: Unknown
- Date: Mon, 1 Nov 2004 09:51:10 EST
- While my throttle bodies are at Big Apple Hydraulics getting rebushed, I've been attempting to polish the suction chambers. I'm using a Dremel and while I've gotten a lot of the dull finish off, it's
- /html/triumphs/2004-11/msg00004.html (7,308 bytes)
- 2. RE: Polishing the carbs (score: 1)
- Author: Unknown
- Date: Mon, 1 Nov 2004 08:17:27 -0700
- It is a process that starts out all the pitting out of the metal and getting to a smooth finish before the actual polishing is done. If there are pits, you will have to start with sandpaper and get p
- /html/triumphs/2004-11/msg00006.html (8,493 bytes)
- 3. RE: Polishing the carbs (score: 1)
- Author: Unknown
- Date: Mon, 1 Nov 2004 08:57:41 -0800
- JIC Fred is napping, clear PC would work. Of course, you could just use silver PC and not have to buff it out to begin with. HF has these for cheap. You really should plan on using several different
- /html/triumphs/2004-11/msg00007.html (8,578 bytes)
- 4. Re: Polishing the carbs (score: 1)
- Author: Unknown
- Date: Mon, 1 Nov 2004 10:19:14 -0800
- The real key is sanding first ... very fine sand paper, wet/dry to get the part smooooth, then and only then can you really get a chrome like polish... btdt ... Non LBC frustrating question: Is Noon
- /html/triumphs/2004-11/msg00008.html (8,297 bytes)
- 5. RE: Polishing the carbs (score: 1)
- Author: Unknown
- Date: Mon, 1 Nov 2004 15:00:49 -0500
- When my digital clocks strike noon they all change to PM. Bob Danielson 1975 TR6 http://pages.cthome.net/BobD/ The real key is sanding first ... very fine sand paper, wet/dry to get the part smooooth
- /html/triumphs/2004-11/msg00009.html (9,134 bytes)
- 6. Re: Polishing the carbs (score: 1)
- Author: Unknown
- Date: Mon, 01 Nov 2004 13:44:15 -0700
- It is just 'noon' not a.m. or p.m. since it is neither before (ante) nor after (post) the meridian. 12:00 midnight is 12:00 a.m. Geo Hahn Check out the new British Cars Forum: http://www.team.net/the
- /html/triumphs/2004-11/msg00012.html (8,367 bytes)
- 7. RE: Polishing the carbs (score: 1)
- Author: Unknown
- Date: Mon, 1 Nov 2004 15:54:29 -0500
- Message text written by "Bob Danielson" google is no help, and I need to know ... thanks ... < Hard to say. 11:59:59 is AM and 12:00:01 is PM. But what do AM and PM stand for? I think it may mean som
- /html/triumphs/2004-11/msg00013.html (8,548 bytes)
- 8. Re: Polishing the carbs (score: 1)
- Author: Unknown
- Date: Mon, 01 Nov 2004 22:17:28 +0100
- agreed Geo, Surely the same applies to midnight...12:00 a.m. or 12:00 p.m. In my book noon is 12h00 and midnight 24h00 Cheers Mike http://mikek.9online.fr/index.htm Check out the new British Cars For
- /html/triumphs/2004-11/msg00015.html (8,329 bytes)
- 9. RE: Polishing the carbs (score: 1)
- Author: Unknown
- Date: Mon, 1 Nov 2004 13:25:32 -0800
- Technically, the instant of noon is neither, it's the meridian referred to in AnteMeridian and PostMeridian. But the second that extends from noon until 12:00:01 is after the meridian, so noon is ge
- /html/triumphs/2004-11/msg00016.html (8,481 bytes)
- 10. Re: Polishing the carbs (score: 1)
- Author: Unknown
- Date: Mon, 01 Nov 2004 23:17:44 +0100
- Mike Kitchener babbled: Which should read: Midnight is 00h00 if "ante" to the noon in question or 24h00 if "post". The carbs will shine more if there is a full moon and no clouds. Cheers Mike http://
- /html/triumphs/2004-11/msg00017.html (8,475 bytes)
- 11. RE: Polishing the carbs (score: 1)
- Author: Unknown
- Date: Mon, 1 Nov 2004 14:22:49 -0800
- Well there is an overwhelming consensus that it is PM, technically it is neither, Noon is just that Noon, as is Midnight just Midnight. None of that manners however when you are programing a digital
- /html/triumphs/2004-11/msg00018.html (8,812 bytes)
- 12. Re: Polishing the carbs (score: 1)
- Author: Unknown
- Date: Mon, 1 Nov 2004 18:09:11 -0500
- Message text written by Geo Hahn after (post) the meridian. 12:00 midnight is 12:00 a.m. < By your same logic I would conclude that midnight is also neither AM or PM. It is 12:00 Midnight. Dave Check
- /html/triumphs/2004-11/msg00019.html (8,581 bytes)
- 13. RE: Polishing the carbs (score: 1)
- Author: Unknown
- Date: Mon, 1 Nov 2004 18:12:27 -0500
- Message text written by "Joe Curry" < OK. Latin is not my strong suit. Hasta Luego, bis spdter, ` bien ttt, see ya. Dave Check out the new British Cars Forum: http://www.team.net/the-local/tiki-view_
- /html/triumphs/2004-11/msg00020.html (8,622 bytes)
- 14. RE: Polishing the carbs (score: 1)
- Author: Unknown
- Date: Mon, 1 Nov 2004 18:15:57 -0500
- Message text written by Bill & Skip Pugh it is neither, Noon is just that Noon, as is Midnight just Midnight. None of that manners however when you are programing a digital gate opener which you want
- /html/triumphs/2004-11/msg00021.html (8,820 bytes)
- 15. RE: Polishing the carbs (score: 1)
- Author: Unknown
- Date: Mon, 1 Nov 2004 16:38:07 -0800
- Oh, sure, now you just make it simple!!! <G> -- Bill Pugh 1957 TR3 aka Casper Wallace, CA Check out the new British Cars Forum: http://www.team.net/the-local/tiki-view_forum.php?forumId=8
- /html/triumphs/2004-11/msg00022.html (9,177 bytes)
- 16. RE: Polishing the carbs (score: 1)
- Author: Unknown
- Date: Tue, 2 Nov 2004 07:41:40 -0500
- Message text written by Dave Massey Hasta Luego, bis spdter, ` bien ttt, see ya. < Ack. I guess you cant use extended characters through this listserve. No a's mitt umlats or o - accent circumflex al
- /html/triumphs/2004-11/msg00029.html (8,346 bytes)
- 17. RE: Polishing the carbs (score: 1)
- Author: Unknown
- Date: Tue, 2 Nov 2004 07:57:47 -0800
- Nope. It's good ol American Standard Coded Information Interchange or gobbledegook. Right, Lion ? <G> Randall
- /html/triumphs/2004-11/msg00036.html (7,800 bytes)
- 18. Re: Polishing the carbs (score: 1)
- Author: Unknown
- Date: Tue, 2 Nov 2004 14:26:12 -0500
- Message text written by INTERNET:pethier@isd.net apparently not addressed... Sounds like a good reason to use "Midnight Plus One". < One could argue that Noon and Midnight are not things. They are no
- /html/triumphs/2004-11/msg00039.html (8,441 bytes)
- 19. Re: Polishing the carbs (score: 1)
- Author: Unknown
- Date: Tue, 02 Nov 2004 21:33:29 -1000
- In 1800's correspondence, it was common to see noon written as "12 M." For some reason we got away from that. scott s. . Participate in Democracy. "In the end, we will not so much remember the words
- /html/triumphs/2004-11/msg00044.html (8,223 bytes)
- 20. Re: Polishing the carbs (score: 1)
- Author: Unknown
- Date: Wed, 3 Nov 2004 07:56:01 -0500
- Message text written by "scott s." For some reason we got away from that. < Possibly because the french word for noon is midi. The spanish word is mediodia. I would think that the latin word is somet
- /html/triumphs/2004-11/msg00045.html (8,132 bytes)
This search system is powered by
Namazu