- 1. Proper paint for wood framing (score: 1)
- Author: pdburket@intrepid.net (David & Pat)
- Date: Tue, 18 Feb 1997 11:07:32 -0500
- Fellow Morganeers, I am currently preping my body frame for mounting to chassis. Due to the poor condition of the original body, I purchased a body from the factory. I read that an additional way to
- /html/morgans/1997-02/msg00063.html (8,497 bytes)
- 2. Re: Proper paint for wood framing (score: 1)
- Author: "Blair, John" <jblair@virgo.massolant.navy.mil>
- Date: Tue, 18 Feb 1997 11:59:23 -5
- David, I used West System Epoxy on my wood. I had the entire tub taken apart and painted each piece with the epoxy, sanded it, and applied a 2nd coat. My wood was done in 90. The boat builders have b
- /html/morgans/1997-02/msg00065.html (9,848 bytes)
- 3. Re: Proper paint for wood framing (score: 1)
- Author: "Vandergraaf, Chuck" <VandergT@aecl.ca>
- Date: Tue, 18 Feb 1997 12:37:57 -0500
- In response to Gerry Willburn's request: Gerry, The chassis number of my 1952 +4 is P. 2473 The engine number is V.345.ME The car left the factory 1952 September 15. It is a 2-seater. I bought it use
- /html/morgans/1997-02/msg00066.html (8,440 bytes)
- 4. RE: Proper paint for wood framing (score: 1)
- Author: "Vodden, Dave" <Dave.Vodden@Telematics.com>
- Date: Tue, 18 Feb 97 17:12:00 PST
- In response to David's queries below Current wood frames obtained from the Factory are Tanalised and have been so since about 1986. This is a wood treatment used in house building and in the manufact
- /html/morgans/1997-02/msg00072.html (10,431 bytes)
- 5. Re: Proper paint for wood framing (score: 1)
- Author: Fred_H._Birkbeck@ieaust.org.au (Fred H. Birkbeck)
- Date: 20 Feb 1997 15:13:01 GMT
- I painted my "woodwork" with marine paintwork which looks like it is a complete sealant. Although the painting was carried out about 20 years ago, the car has only been used on the road for the last
- /html/morgans/1997-02/msg00076.html (7,296 bytes)
- 6. Re: Proper paint for wood framing (score: 1)
- Author: NKED65A@prodigy.com ( BOB NOGUEIRA)
- Date: Thu, 20 Feb 1997 22:50:41, -0500
- -- [ From: Bob Nogueira * EMC.Ver #3.1a ] -- David: Prior to Morgans my hobby was restoring wood sail boats. Here in Texas wood rots very quickly and anyone with a wood boat leans quickly about rot.
- /html/morgans/1997-02/msg00085.html (11,850 bytes)
This search system is powered by
Namazu