- 1. RUST REMOVAL (score: 1)
- Author: Michael Leach <mrleach@Fair.Net>
- Date: Wed, 16 Jul 1997 03:39:16 -0400
- I am going to paint an older trailer with some heavy surface rust (pitted). Is there a cheap way to remove most of it fast (i.e. acid, rust removers found at home depot)? It does not have to be prett
- /html/shop-talk/1997-07/msg00062.html (6,693 bytes)
- 2. Re: RUST REMOVAL (score: 1)
- Author: Arthur Pfenninger <ch155@freenet.buffalo.edu>
- Date: Tue, 15 Jul 1997 16:42:44 -0400 (EDT)
- Rust remove will cost a fortune, as long as you're not to picky just use a heavy wire brush in your electric drill. If you have a grinder it's more powerful and you can get a wire brush made for it.
- /html/shop-talk/1997-07/msg00063.html (7,148 bytes)
- 3. Re: RUST REMOVAL (score: 1)
- Author: Michael Sloane <msloane@worldnet.att.net>
- Date: Tue, 15 Jul 1997 21:26:15 -0400
- I have had good luck in this area with "Rust Converter" from Gemplers. I think it is sold under different names by others. It is a black liquid that dries shiny black and acts as a primer and rust bi
- /html/shop-talk/1997-07/msg00064.html (7,520 bytes)
- 4. Re: RUST REMOVAL (score: 1)
- Author: Michael Leach <mrleach@Fair.Net>
- Date: Thu, 17 Jul 1997 20:58:19 -0400
- Thanks for everyones suggestions. I found a sand blaster that I can use. This seems to be the way to go with all of the "nook and craneys". I will use one of the metal preps suggested and paint with
- /html/shop-talk/1997-07/msg00071.html (6,837 bytes)
- 5. Re: RUST REMOVAL (score: 1)
- Author: Arthur Pfenninger <ch155@freenet.buffalo.edu>
- Date: Thu, 17 Jul 1997 10:15:04 -0400 (EDT)
- Unless you can get hold of a good pressurized unit be prepared to spend many hours on the job. You are going to want to get a hood also otherwise your face will suffer and if you wear glasses they wi
- /html/shop-talk/1997-07/msg00072.html (7,422 bytes)
This search system is powered by
Namazu