- 1. Rear Brakes (score: 1)
- Author: "jaboruch" <jaboruch@netzero.net>
- Date: Sun, 9 Jul 2000 01:20:04 -0700
- Amici, Earlier this year I was able to fit vented front rotors and Willwood calipers to my TR3, but since then I have had too much front brakes compared to the rear. I have 9 inch alfins at the back,
- /html/fot/2000-07/msg00058.html (7,724 bytes)
- 2. Re: Rear Brakes (score: 1)
- Author: WEmery7451@aol.com
- Date: Sun, 9 Jul 2000 10:14:02 EDT
- << If not I may just put steel 10 inch drums on and live with the extra weight in the back. >> Good luck with finding brake shoes for these drums. Fortunately, the brake lining does not wear very fas
- /html/fot/2000-07/msg00060.html (6,955 bytes)
- 3. Re: Rear Brakes (score: 1)
- Author: BillDentin@aol.com
- Date: Sun, 9 Jul 2000 10:59:52 EDT
- << << If not I may just put steel 10 inch drums on and live with the extra weight in the back. >> Good luck with finding brake shoes for these drums. Fortunately, the brake lining does not wear very
- /html/fot/2000-07/msg00061.html (7,561 bytes)
- 4. Re: Rear Brakes (score: 1)
- Author: WEmery7451@aol.com
- Date: Sun, 9 Jul 2000 16:47:20 EDT
- << I have 9 inch alfins at the back, and already have the bias bar set as far rear as it will go. I know that there were some aluminum 10 inch rear drums available way back when, does anyone know of
- /html/fot/2000-07/msg00064.html (7,262 bytes)
- 5. Re: Rear Brakes (score: 1)
- Author: "R. John Lye" <rjl6n@cstone.net>
- Date: Sun, 09 Jul 2000 20:53:35 -0700
- Hi Joe, Chip Bond put a set of Wilwood Dyna-Lite II's on his TR-4 using a bracket that's readily available from the circle track vendors. It needs to be slightly modified (shortened) and drilled to m
- /html/fot/2000-07/msg00065.html (7,180 bytes)
- 6. Re: Rear Brakes (score: 1)
- Author: "jaboruch" <jaboruch@netzero.net>
- Date: Mon, 17 Jul 2000 08:54:24 -0700
- John, Do you have any additional details about this conversion? Any specifics about the bracket? I assume the SAAB rotor and hat are off of the rear? Where did he mount the rotors; towards the front
- /html/fot/2000-07/msg00113.html (8,169 bytes)
- 7. Re: Rear Brakes (score: 1)
- Author: "jaboruch" <jaboruch@netzero.net>
- Date: Mon, 17 Jul 2000 09:19:21 -0700
- I did loose some rear braking when I changed over to the 9 inch brakes a few years ago, but I was able to live with it until I got these excellent front brakes now. I think the rear discs will have t
- /html/fot/2000-07/msg00115.html (8,119 bytes)
- 8. Re: Rear Brakes (score: 1)
- Author: rjl6n@cstone.net (R. John Lye)
- Date: Mon, 17 Jul 2000 19:52:41 -0700
- Hi Joe, Any >specifics about the bracket? It is an off-the-shelf bracket designed for the Dyna-Lite II caliper. but it is designed for something like a 12" rotor and a 3" axle tube, so the inner radi
- /html/fot/2000-07/msg00121.html (9,103 bytes)
This search system is powered by
Namazu