- 1. Rear Spring Removal (score: 1)
- Author: "John Phillips" <TR6@vigoris.net>
- Date: Tue, 2 May 2000 20:46:47 -0500
- You have to remove the rear hub assy. before you let the trailing arm down. Jack the trailing arm up, remove the 6 nuts holding it in, clip the wire on the rubber boot and pull it out. Then loose th
- /html/6pack/2000-05/msg00016.html (7,092 bytes)
- 2. Re: Rear Spring Removal (score: 1)
- Author: "Kevin D. O'Connor" <oconnor@fuse.net>
- Date: Wed, 03 May 2000 08:25:10 -0400
- I've removed/replaced my rear springs a few times, but I cannot remember ever taking the hub or axle out. I think I had to rotate the axle, and push down on the trailing arm. There is not too much te
- /html/6pack/2000-05/msg00020.html (8,021 bytes)
This search system is powered by
Namazu