- 1. Refinishing Tiger Air Cleaner (score: 1)
- Author: Todd Gifford <tgifford@dee-inc.com>
- Date: Tue, 9 Sep 2003 17:00:07 -0500
- Wanted to get some advice on refinishing the original Tiger Air Cleaner -- best methods used to strip the old paint, and confirm the best and correct primer/paint to use to match the original (ie. Ha
- /html/tigers/2003-09/msg00057.html (7,016 bytes)
- 2. RE: Refinishing Tiger Air Cleaner (score: 1)
- Author: "ron fraser" <rfraser@bluefrog.biz>
- Date: Tue, 9 Sep 2003 19:35:30 -0400
- If there is a good section of paint on the air cleaner, 1st take a picture of it for later reference. You can use liquid strip of your chose or sandblast the pieces. I sandblasted my air cleaner par
- /html/tigers/2003-09/msg00058.html (8,680 bytes)
- 3. Re: Refinishing Tiger Air Cleaner (score: 1)
- Author: Steve Laifman <SLaifman@socal.rr.com>
- Date: Tue, 09 Sep 2003 18:10:31 -0700
- Hammertone "silver" is correct. Paint striping depends on condition. If it's just dull, then all you need do is uses fine garnet paper to prep the surface. If it's cruddy, or rusty, it may need remo
- /html/tigers/2003-09/msg00059.html (7,683 bytes)
- 4. RE: Refinishing Tiger Air Cleaner (score: 1)
- Author: "Stu Brennan" <stubrennan@comcast.net>
- Date: Tue, 9 Sep 2003 21:56:09 -0400
- I used a combination of a sander and a wirebrush on my drill to get most of the crummy red a previous owner applied. With a mop, I think. Then I used a propane torch to char the paint remaining in th
- /html/tigers/2003-09/msg00060.html (7,292 bytes)
- 5. Re: Refinishing Tiger Air Cleaner (score: 1)
- Author: "Kathy and Erich Coiner" <kathy.coiner@gte.net>
- Date: Tue, 9 Sep 2003 20:26:43 -0700
- I bought Hammerite Silver from my local home supply megabox. I used paint remover purchased from same megabox. I used steel wool with the paint remover to get all the crud out of the nooks and cranni
- /html/tigers/2003-09/msg00061.html (7,963 bytes)
This search system is powered by
Namazu