Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Rivet\s+Tools\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*Rivet\s+Tools\s*$/: 7 ]

Total 7 documents matching your query.

1. Rivet Tools (score: 1): Author: "Christopher M. Delling" <cdelling@mail.ic.net>; Date: Thu, 01 Aug 1996 16:06:06 -0400; Here is my problem, strange but true. I have what I assume to be a fairly typical example of a pop-rivet tool, made by a major manufacturer, bought from a major home-improvement chain. My problem inv; /html/mgs/1996-08/msg00037.html (7,236 bytes)
2. Re: Rivet Tools (score: 1): Author: jsnyder@icds5.dseg.ti.com (James A. Snyder); Date: Thu, 1 Aug 96 15:17:43 CDT; If I understand the problem correctly, maybe you could put some very small washers on the "nail" part of the pop rivet to space it away from the rivet gun while you install it. Jim S.; /html/mgs/1996-08/msg00039.html (7,602 bytes)
3. Rivet Tools (score: 1): Author: Chuck_Ciaffone_at_WG-RAL@smtp.wg.com; Date: Thu, 01 Aug 96 16:22:45 EST; Seems to me, all the snaps I replaced on the body went on with stainless sheet-metal screws or small, fine-thread, phillips-head bolts. For which I went to the locak hardware and got stainless. I kno; /html/mgs/1996-08/msg00040.html (7,027 bytes)
4. RE: Rivet Tools (score: 1): Author: RVBurkholder@city.surrey.bc.ca (Burkholder, Ross); Date: Thu, 1 Aug 1996 13:59:40 -0700; I used the same tool and found that if I put a few very small washers around the stem of the rivet (the part that breaks off and ends up stuck in the rivet gun) before you place the rivet in the gun,; /html/mgs/1996-08/msg00041.html (8,064 bytes)
5. RE: Rivet Tools (score: 1): Author: "REICHLE, CHRISTOPHER" <CREICHLE@nsc.msmail.miami.edu>; Date: Thu, 01 Aug 1996 18:04:00 -0700 (PDT); Go back to Home depo and buy the more expensive model which does not have a flat face to it. It has a little nib which looks similar to a greasing nib. It will fit inside the snap. The model I got al; /html/mgs/1996-08/msg00043.html (7,544 bytes)
6. Rivet Tools (score: 1): Author: Westley Johnson <kooksei@hooked.net>; Date: Thu, 1 Aug 1996 16:13:44 -0700 (PDT); one other thing you should be aware of is that when the rivet "pops" it will release the rivet gun in a violent manner. as an extra precaution i always use a piece of sheet rubber that has a hole cut; /html/mgs/1996-08/msg00048.html (7,070 bytes)
7. Re: Rivet Tools (score: 1): Author: donmathis@lucent.com; Date: Fri, 02 Aug 1996 10:38:30 -0400; I added a small white teflon washer at the base of the snap so that the pressure of the snap would not crack the paint. Don Mathis,Ph.D. LUCENT TECHNOLOGIES donmathis@lucent.com '61 MGA '37 Bentley; /html/mgs/1996-08/msg00068.html (7,370 bytes)

Current List: 1 - 7
Page: [1]