- 1. Rocker Panel Replacement. (score: 1)
- Author: Lancer7676@aol.com
- Date: Fri, 2 Apr 1999 00:10:44 EST
- New question from the guy on thin ice!!! This morning I removed the first of both rocker panels that I am going to replace on my 1967 Sprite. I drilled out all the spot welds I saw and used an air ch
- /html/spridgets/1999-04/msg00022.html (7,440 bytes)
- 2. Re: Rocker Panel Replacement. (score: 1)
- Author: "Jay Bourgraf" <jaybird@isoc.net>
- Date: Fri, 2 Apr 1999 21:40:09 -0500
- First I lined up the inner hinge pillar with the footwell panel then scribed along the outside to mark its location on the footwell. I then drilled small holes in the footwell, clamped the pillar to
- /html/spridgets/1999-04/msg00075.html (7,700 bytes)
- 3. Re: Rocker Panel Replacement. (score: 1)
- Author: Lancer7676@aol.com
- Date: Sat, 3 Apr 1999 07:19:08 EST
- Whew!! Thanks Jay! I will copy this off and take it down to my shop to study it with the pieces in front of me. --David
- /html/spridgets/1999-04/msg00086.html (6,809 bytes)
This search system is powered by
Namazu