- 1. Rocker Pedestals (score: 1)
- Author: gbaker@customcpu.com (Baker, G.)
- Date: Thu, 10 Sep 1998 17:15:43 -0800
- "If your head were machined a lot (say 1/16" or more), shims under all four pedestals would restore the original geometry. However, they would surely be classified as four "thick" shims. The two orig
- /html/mgs/1998-09/msg00516.html (6,910 bytes)
- 2. Rocker Pedestals (score: 1)
- Author: gbaker@customcpu.com (Baker, G.)
- Date: Wed, 23 Sep 1998 18:57:45 -0800
- "If your head were machined a lot (say 1/16" or more), shims under all four pedestals would restore the original geometry. However, they would surely be classified as four "thick" shims. The two orig
- /html/mgs/1998-09/msg01322.html (6,922 bytes)
- 3. Re: Rocker Pedestals (score: 1)
- Author: Bill Schooler <schooler@erols.com>
- Date: Thu, 24 Sep 1998 07:04:09 -0400
- in 1968: Cylinder head depth - 3 11/64 plus .015 in, minus .000 in. -- *Bill Schooler *Check the MGCC Wash DC Centre Web Page *Woodbridge, VA *http://members.aol.com/mgccwdcc/ *schooler@erols.com *5
- /html/mgs/1998-09/msg01331.html (7,494 bytes)
This search system is powered by
Namazu