- 1. STATIC TIMING WITH PERTRONIX IGNITION (score: 1)
- Author: "Brashear, Jack, N" <JNBrashear@garverengineers.com>
- Date: Wed, 9 May 2007 10:38:15 -0500
- Hi All, how do I hook up a test light for static timing with the Pertronix ignition?? What's the proper way to do a static timing setting on my brand new engine (29E) rebuild?? Thanks for all ya'lls
- /html/healeys/2007-05/msg00195.html (6,565 bytes)
- 2. RE: STATIC TIMING WITH PERTRONIX IGNITION (score: 1)
- Author: "Brashear, Jack, N" <JNBrashear@garverengineers.com>
- Date: Thu, 10 May 2007 09:34:50 -0500
- Many thanks Alan...but won't that set the timing at TDC? I thought it should be 5 or 6 BTDC, am I wrong?? Jack Jack - It's simple - turn the motor until the pully mark is indicating TDC (check the di
- /html/healeys/2007-05/msg00213.html (7,769 bytes)
- 3. Re: STATIC TIMING WITH PERTRONIX IGNITION (score: 1)
- Author: "Alan Seigrist Blue 100" <healey.nut@gmail.com>
- Date: Fri, 11 May 2007 06:39:36 +0800
- Ok, then set the mark on the crank pully accordingly. All you need to do is get it close then start the motor and final adjust it at idle per spec. - Original message - Many thanks Alan...but won't t
- /html/healeys/2007-05/msg00230.html (8,532 bytes)
This search system is powered by
Namazu